I wish I knew! I have a 694D and a K7TPro2AR and BOTH have the "lite" RAID Controller. I would LOVE to get this thing or my ASUS A7V-133 RAID to work with RH 7.2 in RAID 1. I have used the software hack on the A7V-133 to make it go from "lite"(RAID 0 only) to full FastTrak 100 capabilities.(Freeware software hack..email for the link). I could always flash it back cause it is itching to become an email server....and do away with 2000 Server! I am hoping that some Kind soul will share the "key to the kingdom" with us!! Hint Hint Thanks, WJ ----- Original Message ----- From: "Fabrizio Gabbiani" <gabbiani@xxxxxxxxxxx> To: <ataraid-list@xxxxxxxxxx> Sent: Tuesday, December 11, 2001 4:51 PM Subject: MSI-694D+Promise+Raid 0 > > Hi, > > I was wondering if anyone would have input concerning the following problem. > > I have a linux box with an MSI 694D motherboard (dual PIII processor) > with an on > board RAID driver from Promise (Fasttrack 100 Lite, 20265). The machine > is happily > working with linux RH 70 (2.2.16-22smp) and the Promise driver > (rhddsmp-110b6). > I wanted to upgrade to a 2.4 kernel and my understanding was that the > newest kernels > should have incorporated support for RAID Promise 20265. I downloaded > 2.4.16 compiled with the ATA > RAID options, SMP support and installed it on an additional harddrive. > However, as soon as I activate the > RAID array (i.e. physically plug in the power to the two hard drives > that make up the array) > the booting sequences freezes right after detecting the 20265. > Everything works fine if there > is no RAID array (ie., the two hard drives are power unplugged). > > Thanks in advance for any suggestions to debug this. > > Fabrizio. > > -- > Fabrizio Gabbiani phone: (713) 798 1849 > Division of Neuroscience fax: (713) 798 3946 > Baylor College of Medicine email: gabbiani@xxxxxxxxxxx > One Baylor Plaza, > Houston, TX 77030 > > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list
