[trunkgroups] [channels] ; local interconnect context=national-calls linkset=1 group=1 signalling = ss7 ss7type = itu ss7_calling_nai=national ss7_called_nai=national callerid=asreceived usecallerid=yes threewaycalling=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 pointcode = xxxxx adjpointcode = xxxxx defaultdpc = xxxxx networkindicator=national_spare cicbeginswith = 2 sigchan = 1 channel = 2-16 ; international interconnect context=international-calls linkset=1 group=2 signalling = ss7 ss7type = itu ss7_calling_nai=international ss7_called_nai=national callerid=asreceived usecallerid=yes threewaycalling=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 pointcode = xxxxx adjpointcode = xxxxx defaultdpc = xxxxx slc=1 networkindicator=national_spare ; i dont know what configuration Telco wants from you - with two sigchannels or with just one ; if with one : comment or change sigchan, change cicbeginswith and channel sigchan=17 cicbeginswith = 18 channel = 18-31 On 05/16/2014 10:39 AM, joseph mpora wrote: > I still see this in the ss7 debug: > > Network Indicator: 3 Priority: 0 User Part: ISUP (5) > > despite have the following config: > > [trunkgroups] > > [channels] > context=incoming > linkset=1 > group=1 > signalling = ss7 > ss7type = itu > ss7_calling_nai=national > ss7_called_nai=national > callerid=asreceived > usecallerid=yes > threewaycalling=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > > pointcode = xxxxx > adjpointcode = xxxxx > defaultdpc = xxxxx > networkindicator=national_spare > > ; local interconnect > cicbeginswith = 2 > sigchan = 1 > channel = 2-16 > > ;international interconnect > > group = 2 > ss7_calling_nai=international (I have also tried dynamic here with same results) > channel =17-31 > > If I change the first ss7_calling_nai to dynamic, all calls go with > Network Indicator: 4 > > Joseph > > > On 15 May 2014 10:35, Marcelo Pacheco <marcelo at m2j.com.br> wrote: >> Yes, most of those parameters are per CIC. >> It should work like this: >> ss7_calling_nai=A >> group=1 >> channel => 1-16 >> ss7_calling_nat=B >> group=2 >> channel => 17-31 >> >> On Thu, May 15, 2014 at 4:31 AM, Wasim Baig <wasim at convergence.pk> wrote: >>> google for ss7_called_nai=dynamic >>> >>> >>> >>> >>> On 15 May 2014 10:09, joseph mpora <klashniv at gmail.com> wrote: >>>> Hullo, >>>> >>>> We have 1 E1 from a telco that they would like us to use for both >>>> local and international traffic. >>>> >>>> I currently have ss7_calling_nai set to national and this works fine >>>> for local calls. Now they would like us to use CIC 17-31 for >>>> international calls on the same E1. >>>> >>>> Is it possible to have ss7_calling_nai as national for CIC 1-16 and >>>> ss7_calling_nai as international on the same E1? >>>> >>>> Joseph Mpora >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> asterisk-ss7 mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>> >>> >>> >>> -- >>> wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | >>> peace be upon you ... >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7
|