ss7 Link reset after 30 seconds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now i make this changes, dahdi was recompilled

dahdi_dynamic.c

  z->chans[x]->sigcap = DAHDI_SIG_EM | DAHDI_SIG_CLEAR | DAHDI_SIG_FXSLS |
                                       DAHDI_SIG_FXSKS | DAHDI_SIG_FXSGS 
| DAHDI_SIG_FXOLS |
                                       DAHDI_SIG_FXOKS | DAHDI_SIG_FXOGS 
| DAHDI_SIG_SF |
                                       /* DAHDI_SIG_DACS_RBS | 
DAHDI_SIG_CAS;*/
                                       /* peter enable dahdi mtp2 for 
tdmoe */
                                       DAHDI_SIG_DACS_RBS | 
DAHDI_SIG_CAS | DAHDI_SIG_MTP2;



and
in system.conf i change dchan with mtp2 and everithing looks great - no 
errors, no debug messages,
just circuits in idle condition.

We will see how stable will be the redfone + tdmoe + mtp2


Have a nice day everyone!


Regards,
Peter

On 12/05/2013 01:39 PM, Attila Domjan wrote:
> More realible, if you are using kernel mode mtp2. The mtp2 is not
> (forgotten?) enabled in dahdi.
>
> to enable mtp2 for tdmoe:
>
> dahdi_dynamic.c
>
> static int _create_dynamic(struct dahdi_dynamic_span *dds)
>
> add DAHDI_SIG_MTP2:
>
> d->chans[x]->sigcap = DAHDI_SIG_EM | DAHDI_SIG_CLEAR |
>                                        DAHDI_SIG_FXSLS | DAHDI_SIG_FXSKS
> |
>                                        DAHDI_SIG_FXSGS | DAHDI_SIG_FXOLS
> |
>                                        DAHDI_SIG_FXOKS | DAHDI_SIG_FXOGS
> |
>                                        DAHDI_SIG_SF | DAHDI_SIG_DACS_RBS
> |
>                                        DAHDI_SIG_CAS | DAHDI_SIG_MTP2;
>
> the mtp2 will be more realible.
> I'm very curious how stable will be the redphone tdmoe for ss7/mtp2.
>
> Regards,
> Attila
>
> On Thu, 2013-12-05 at 13:27 +0200, peterpet wrote:
>> I have found the problem:
>>
>> I have reconfiguring timing for spans:
>>
>> dynamic=ethmf,eth3/00:50:C2:65:DE:91/0,31,0
>> dynamic=ethmf,eth3/00:50:C2:65:DE:91/1,31,0
>> dynamic=ethmf,eth3/00:50:C2:65:DE:91/2,31,0
>> dynamic=ethmf,eth3/00:50:C2:65:DE:91/3,31,1
>>
>> dynamic=ethmf,eth2/00:50:C2:65:DE:93/0,31,0
>> dynamic=ethmf,eth2/00:50:C2:65:DE:93/1,31,0
>> dynamic=ethmf,eth2/00:50:C2:65:DE:93/2,31,0
>> dynamic=ethmf,eth2/00:50:C2:65:DE:93/3,31,2
>>
>> The last column is for timing. This is working configuration!
>> I'm using Redfone fonebridge for information.
>>
>> Thanks Attila again for help support.
>> Good day to you.
>>
>>
>> Regards,
>> Peter
>>
>>
>>
>>
>>
>> On 12/05/2013 01:12 PM, peterpet wrote:
>>> After changes:
>>>
>>> [1]
>>> active=yes
>>> alarms=UNCONFIGURED
>>> description=Dynamic 'ethmf' span at 'eth3/00:50:C2:
>>> name=DYN/ethmf/eth3/00:5
>>> manufacturer=
>>> devicetype=
>>> location=
>>> basechan=1
>>> totchans=31
>>> irq=0
>>> type=digital-
>>> syncsrc=0
>>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>> coding_opts=
>>> framing_opts=
>>> coding=
>>> framing=
>>>
>>> [2]
>>> active=yes
>>> alarms=UNCONFIGURED
>>> description=Dynamic 'ethmf' span at 'eth3/00:50:C2:
>>> name=DYN/ethmf/eth3/00:5
>>> manufacturer=
>>> devicetype=
>>> location=
>>> basechan=32
>>> totchans=31
>>> irq=0
>>> type=digital-
>>> syncsrc=0
>>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>> coding_opts=
>>> framing_opts=
>>> coding=
>>> framing=
>>>
>>>
>>>
>>> On 12/05/2013 01:08 PM, Attila Domjan wrote:
>>>> replace to:
>>>>
>>>> bchan=2-31
>>>> mtp2=1
>>>> alaw=2-31
>>>>
>>>>
>>>> bchan=33-62
>>>> mtp2=32
>>>> alaw=33-62
>>>>
>>>> and donit forget to reload or restart dahdi
>>>>
>>>> On Thu, 2013-12-05 at 13:04 +0200, peterpet wrote:
>>>>> /etc/dahdi/system.conf
>>>>>
>>>>> bchan=2-31
>>>>> dchan=1
>>>>> alaw=2-31
>>>>>
>>>>>
>>>>> bchan=33-62
>>>>> dchan=32
>>>>> alaw=33-62
>>>>>
>>>>> On 12/05/2013 01:01 PM, Attila Domjan wrote:
>>>>>> In /etc/dahdi/system.conf did you define the sigchan like: mtp2 = 1?
>>>>>>
>>>>>>
>>>>>> On Thu, 2013-12-05 at 12:57 +0200, peterpet wrote:
>>>>>>> You catch me unprepared! I dont know! Explain me please what is mean
>>>>>>> kernel mode mtp2 ?!
>>>>>>>
>>>>>>> On 12/05/2013 12:48 PM, Attila Domjan wrote:
>>>>>>>> Are you using kernel mode mtp2?
>>>>>>>>
>>>>>>>> On Thu, 2013-12-05 at 12:47 +0200, peterpet wrote:
>>>>>>>>> Situation is same:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> MTP3 T2 timer started on link SLC: 0 ADJPC: 1606
>>>>>>>>> [Dec  5 12:46:00] WARNING[13462]: chan_dahdi.c:10094
>>>>>>>>> ss7_linkset: MTP2
>>>>>>>>> link down (SLC 154887680)
>>>>>>>>> Changeover completed on link SLC: 0 PC: 1606 FSN: 10
>>>>>>>>> [Dec  5 12:46:00] ERROR[13462]: chan_dahdi.c:10935 dahdi_ss7_error:
>>>>>>>>> Adjecent SP PC: 1606 DOWN!!!
>>>>>>>>> [Dec  5 12:46:00] WARNING[13462]: chan_dahdi.c:10094
>>>>>>>>> ss7_linkset: MTP2
>>>>>>>>> link down (SLC 154906720)
>>>>>>>>> --- SS7 Down ---
>>>>>>>>> [Dec  5 12:46:01] ERROR[13462]: chan_dahdi.c:10935
>>>>>>>>> dahdi_ss7_error: T7
>>>>>>>>> expired on link SLC: 1 ADJPC: 1606
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> ss7node1*CLI>
>>>>>>>>> MTP2 link up (SLC 154906720)
>>>>>>>>> MTP2 link up (SLC 154887680)
>>>>>>>>> MTP3 T19 timer started PC: 1606
>>>>>>>>> MTP3 T21 timer stopped PC: 1606
>>>>>>>>> Adjecent SP PC: 1606 UP!!!
>>>>>>>>> LINKSET UP DELAYING RESETTING
>>>>>>>>> --- SS7 Up ---
>>>>>>>>> Resetting CICs 2 to 31
>>>>>>>>> ISUP timer t22 (15000ms) started on CIC 2 DPC 1600
>>>>>>>>> ISUP timer t23 (300000ms) started on CIC 2 DPC 1600
>>>>>>>>> Resetting CICs 3202 to 3231
>>>>>>>>> ISUP timer t22 (15000ms) started on CIC 3202 DPC 1600
>>>>>>>>> ISUP timer t23 (300000ms) started on CIC 3202 DPC 1600
>>>>>>>>> ISUP timer t22 stopped on CIC 2 DPC: 1600
>>>>>>>>> ISUP timer t23 stopped on CIC 2 DPC: 1600
>>>>>>>>> Got reset acknowledgement from CIC 2 to 31 DPC: 1600
>>>>>>>>> ISUP timer t22 stopped on CIC 3202 DPC: 1600
>>>>>>>>> ISUP timer t23 stopped on CIC 3202 DPC: 1600
>>>>>>>>> Got reset acknowledgement from CIC 3202 to 3231 DPC: 1600
>>>>>>>>>
>>>>>>>>>        Adjecent SP PC: 1606 STATE: UP
>>>>>>>>>        TRA:  GOT SENT    T19: running T21: not running
>>>>>>>>>        Routes:
>>>>>>>>>          DPC       State        T6       T10
>>>>>>>>>         3905         TFP         -   running
>>>>>>>>>         5669         TFP         -   running
>>>>>>>>>         5921         TFP         -   running
>>>>>>>>>        Link SLC: 0 NetMngSLS: 0
>>>>>>>>>          State:      INSERVICE,  UP
>>>>>>>>>          STD Test:  passed
>>>>>>>>>          Got, sent :
>>>>>>>>>          Inhibit:
>>>>>>>>>          Changeover: NO
>>>>>>>>>          Tx buffer:  0
>>>>>>>>>          Tx queue:   0
>>>>>>>>>          Retrans pos 0
>>>>>>>>>          CO buffer:  0
>>>>>>>>>          CB buffer:  0
>>>>>>>>>          Last FSN:   5
>>>>>>>>>          MTP3timers: Q707_T2(15s)
>>>>>>>>>        Link SLC: 1 NetMngSLS: 1
>>>>>>>>>          State:      INSERVICE,  UP
>>>>>>>>>          STD Test:  passed
>>>>>>>>>          Got, sent :
>>>>>>>>>          Inhibit:
>>>>>>>>>          Changeover: NO
>>>>>>>>>          Tx buffer:  0
>>>>>>>>>          Tx queue:   0
>>>>>>>>>          Retrans pos 0
>>>>>>>>>          CO buffer:  0
>>>>>>>>>          CB buffer:  0
>>>>>>>>>          Last FSN:   7
>>>>>>>>>          MTP3timers: Q707_T2(15s)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 12/05/2013 12:38 PM, Attila Domjan wrote:
>>>>>>>>>> You should define timers for correct operation, no default
>>>>>>>>>> values, you
>>>>>>>>>> should define timers after the sigchan definitions:
>>>>>>>>>>
>>>>>>>>>> mtp3_timer.q707_t1 = 4000
>>>>>>>>>>
>>>>>>>>>> mtp3_timer.q707_t1 = 4000
>>>>>>>>>> mtp3_timer.q707_t2 = 30000
>>>>>>>>>>
>>>>>>>>>> mtp3_timer.t1 = 500
>>>>>>>>>> mtp3_timer.t2 = 700
>>>>>>>>>> mtp3_timer.t3 = 500
>>>>>>>>>> mtp3_timer.t4 = 500
>>>>>>>>>> mtp3_timer.t5 = 500
>>>>>>>>>> mtp3_timer.t6 = 500
>>>>>>>>>>
>>>>>>>>>> mtp3_timer.t10 = 60000
>>>>>>>>>> mtp3_timer.t12 = 800
>>>>>>>>>> mtp3_timer.t13 = 800
>>>>>>>>>> mtp3_timer.t14 = 2000
>>>>>>>>>> mtp3_timer.t19 = 67000
>>>>>>>>>> mtp3_timer.t21 = 63000
>>>>>>>>>>
>>>>>>>>>> mtp3_timer.t22 = 300000
>>>>>>>>>> mtp3_timer.t23 = 300000
>>>>>>>>>>
>>>>>>>>>> isup_timer.t1 = 30000
>>>>>>>>>> isup_timer.t2 = 180000
>>>>>>>>>> isup_timer.t5 = 300000
>>>>>>>>>> isup_timer.t6 = 90000
>>>>>>>>>> isup_timer.t7 = 20000
>>>>>>>>>>
>>>>>>>>>> isup_timer.t8 = 10000
>>>>>>>>>>
>>>>>>>>>> isup_timer.t12 = 15000
>>>>>>>>>> isup_timer.t13 = 300000
>>>>>>>>>> isup_timer.t14 = 15000
>>>>>>>>>> isup_timer.t15 = 300000
>>>>>>>>>>
>>>>>>>>>> isup_timer.t16 = 15000
>>>>>>>>>> isup_timer.t17 = 300000
>>>>>>>>>> isup_timer.t18 = 15000
>>>>>>>>>> isup_timer.t19 = 300000
>>>>>>>>>> isup_timer.t20 = 15000
>>>>>>>>>> isup_timer.t21 = 300000
>>>>>>>>>>
>>>>>>>>>> isup_timer.t22 = 15000
>>>>>>>>>> isup_timer.t23 = 300000
>>>>>>>>>>
>>>>>>>>>> isup_timer.t27 = 240000
>>>>>>>>>>
>>>>>>>>>> isup_timer.t33 = 12000
>>>>>>>>>> isup_timer.t35 = 15000
>>>>>>>>>> isup_timer.digittimeout = 5000
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Thu, 2013-12-05 at 12:34 +0200, peterpet wrote:
>>>>>>>>>>> I did not change any of timers. Everithing is by default from
>>>>>>>>>>> your
>>>>>>>>>>> patched version.
>>>>>>>>>>>
>>>>>>>>>>> On 12/05/2013 12:24 PM, Attila Domjan wrote:
>>>>>>>>>>>> mtp3, isup timer values in configuration?
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, 2013-12-05 at 12:17 +0200, peterpet wrote:
>>>>>>>>>>>>> Configuration was checked 1000 times :)
>>>>>>>>>>>>>
>>>>>>>>>>>>> chan_dahdi:
>>>>>>>>>>>>>
>>>>>>>>>>>>> [trunkgroups]
>>>>>>>>>>>>>
>>>>>>>>>>>>> [channels]
>>>>>>>>>>>>> language=en
>>>>>>>>>>>>> context=from-mtel-mobile
>>>>>>>>>>>>> switchtype=euroisdn
>>>>>>>>>>>>> signalling=ss7
>>>>>>>>>>>>> group=1
>>>>>>>>>>>>> ss7type = itu
>>>>>>>>>>>>> ss7_called_nai=dynamic
>>>>>>>>>>>>> ss7_calling_nai=national
>>>>>>>>>>>>> ss7_nationalprefix=0
>>>>>>>>>>>>> ss7_internationalprefix=00
>>>>>>>>>>>>> ss7_networkroutedprefix=iwillnotusethisnai
>>>>>>>>>>>>> ss7_unknownprefix=iwillnotusethisnai
>>>>>>>>>>>>> linkset = 1
>>>>>>>>>>>>> pointcode = 5450
>>>>>>>>>>>>> adjpointcode = 1606
>>>>>>>>>>>>> defaultdpc = 1600
>>>>>>>>>>>>> networkindicator=national
>>>>>>>>>>>>> slc=0
>>>>>>>>>>>>> cicbeginswith = 2
>>>>>>>>>>>>> channel = 2-31
>>>>>>>>>>>>> sigchan = 1
>>>>>>>>>>>>>
>>>>>>>>>>>>> language=en
>>>>>>>>>>>>> context=from-mtel-fix
>>>>>>>>>>>>> switchtype=euroisdn
>>>>>>>>>>>>> signalling=ss7
>>>>>>>>>>>>> usecallingpres=yes
>>>>>>>>>>>>> group=2
>>>>>>>>>>>>> ss7type = itu
>>>>>>>>>>>>> ss7_called_nai=dynamic
>>>>>>>>>>>>> ss7_calling_nai=national
>>>>>>>>>>>>> ss7_nationalprefix=0
>>>>>>>>>>>>> ss7_internationalprefix=00
>>>>>>>>>>>>> ss7_networkroutedprefix=iwillnotusethisnai
>>>>>>>>>>>>> ss7_unknownprefix=iwillnotusethisnai
>>>>>>>>>>>>> linkset = 1
>>>>>>>>>>>>> pointcode = 5450
>>>>>>>>>>>>> adjpointcode = 1606
>>>>>>>>>>>>> defaultdpc = 1600
>>>>>>>>>>>>> networkindicator=national
>>>>>>>>>>>>> slc=1
>>>>>>>>>>>>> cicbeginswith = 3202
>>>>>>>>>>>>> channel = 33-62
>>>>>>>>>>>>> sigchan = 32
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ss7 show linkset 1
>>>>>>>>>>>>> SS7 flags: 0x0
>>>>>>>>>>>>> SS7 linkset 1 status: Up
>>>>>>>>>>>>> SS7 calling nai: 3
>>>>>>>>>>>>> SS7 called nai: -1
>>>>>>>>>>>>> SS7 nationalprefix: 0
>>>>>>>>>>>>> SS7 internationalprefix: 00
>>>>>>>>>>>>> SS7 unknownprefix: iwillnotusethisnai
>>>>>>>>>>>>> SS7 networkroutedprefix: iwillnotusethisnai
>>>>>>>>>>>>> SS7 subscriberprefix:
>>>>>>>>>>>>> Switch type: ITU
>>>>>>>>>>>>> Our point code: 5450
>>>>>>>>>>>>> SLS shift: 0
>>>>>>>>>>>>> numlinks: 2
>>>>>>>>>>>>> numsps: 1
>>>>>>>>>>>>>         ---------------------------------
>>>>>>>>>>>>>         Adjecent SP PC: 1606 STATE: UP
>>>>>>>>>>>>>         TRA:  GOT SENT    T19: not running T21: not running
>>>>>>>>>>>>>         Routes:
>>>>>>>>>>>>>           DPC       State        T6       T10
>>>>>>>>>>>>>          3905         TFP         -         -
>>>>>>>>>>>>>          5669         TFP         -         -
>>>>>>>>>>>>>          5921         TFP         -         -
>>>>>>>>>>>>>         Link SLC: 0 NetMngSLS: 0
>>>>>>>>>>>>>           State:      INSERVICE,  UP
>>>>>>>>>>>>>           STD Test:  passed
>>>>>>>>>>>>>           Got, sent :
>>>>>>>>>>>>>           Inhibit:
>>>>>>>>>>>>>           Changeover: NO
>>>>>>>>>>>>>           Tx buffer:  0
>>>>>>>>>>>>>           Tx queue:   0
>>>>>>>>>>>>>           Retrans pos 0
>>>>>>>>>>>>>           CO buffer:  0
>>>>>>>>>>>>>           CB buffer:  0
>>>>>>>>>>>>>           Last FSN:   7
>>>>>>>>>>>>>           MTP3timers:
>>>>>>>>>>>>>         Link SLC: 1 NetMngSLS: 1
>>>>>>>>>>>>>           State:      INSERVICE,  UP
>>>>>>>>>>>>>           STD Test:  passed
>>>>>>>>>>>>>           Got, sent :
>>>>>>>>>>>>>           Inhibit:
>>>>>>>>>>>>>           Changeover: NO
>>>>>>>>>>>>>           Tx buffer:  0
>>>>>>>>>>>>>           Tx queue:   0
>>>>>>>>>>>>>           Retrans pos 0
>>>>>>>>>>>>>           CO buffer:  0
>>>>>>>>>>>>>           CB buffer:  0
>>>>>>>>>>>>>           Last FSN:   1
>>>>>>>>>>>>>           MTP3timers:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> After some time
>>>>>>>>>>>>>
>>>>>>>>>>>>> Changeover completed on link SLC: 0 PC: 1606 FSN: 5
>>>>>>>>>>>>> [Dec  5 12:14:45] WARNING[13364]: chan_dahdi.c:10094
>>>>>>>>>>>>> ss7_linkset: MTP2
>>>>>>>>>>>>> link down (SLC 154882928)
>>>>>>>>>>>>> [Dec  5 12:14:45] ERROR[13364]: chan_dahdi.c:10935
>>>>>>>>>>>>> dahdi_ss7_error:
>>>>>>>>>>>>> Adjecent SP PC: 1606 DOWN!!!
>>>>>>>>>>>>> [Dec  5 12:14:45] WARNING[13364]: chan_dahdi.c:10094
>>>>>>>>>>>>> ss7_linkset: MTP2
>>>>>>>>>>>>> link down (SLC 154888216)
>>>>>>>>>>>>> --- SS7 Down ---
>>>>>>>>>>>>> [Dec  5 12:14:47] ERROR[13364]: chan_dahdi.c:10935
>>>>>>>>>>>>> dahdi_ss7_error: T7
>>>>>>>>>>>>> expired on link SLC: 1 ADJPC: 1606
>>>>>>>>>>>>> MTP2 link up (SLC 154888216)
>>>>>>>>>>>>> MTP2 link up (SLC 154882928)
>>>>>>>>>>>>> Adjecent SP PC: 1606 UP!!!
>>>>>>>>>>>>> LINKSET UP DELAYING RESETTING
>>>>>>>>>>>>> --- SS7 Up ---
>>>>>>>>>>>>> Resetting CICs 2 to 31
>>>>>>>>>>>>> Resetting CICs 3202 to 3231
>>>>>>>>>>>>> Got reset acknowledgement from CIC 2 to 31 DPC: 1600
>>>>>>>>>>>>> Got reset acknowledgement from CIC 3202 to 3231 DPC: 1600
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 12/05/2013 12:04 PM, Attila Domjan wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi, check the configuration, SLC -1214249800 is
>>>>>>>>>>>>>> interesting....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> [Dec  4 16:11:02] WARNING[7511]: chan_dahdi.c:10094
>>>>>>>>>>>>>>> ss7_linkset: MTP2
>>>>>>>>>>>>>>> link down (SLC -1214249800)
>>>>>>>>>>>>>>> Changeover completed on link SLC: 0 PC: 1606 FSN: 6
>>>>>>>>>>>>>>> [Dec  4 16:11:02] ERROR[7511]: chan_dahdi.c:10935
>>>>>>>>>>>>>>> dahdi_ss7_error:
>>>>>>>>>>>>>>> Adjecent SP PC: 1606 DOWN!!!
>>>>>>>>>>>>>>> [Dec  4 16:11:02] WARNING[7511]: chan_dahdi.c:10094
>>>>>>>>>>>>>>> ss7_linkset: MTP2
>>>>>>>>>>>>>>> link down (SLC 166448424)
>>>>>>>>>>>>>>> --- SS7 Down ---
>>>>>>>>>>>>>>> [Dec  4 16:11:03] ERROR[7511]: chan_dahdi.c:10935
>>>>>>>>>>>>>>> dahdi_ss7_error: T7
>>>>>>>>>>>>>>> expired on link SLC: 1 ADJPC: 1606
>>>>>>>>>>>>>>> MTP2 link up (SLC 166448424)
>>>>>>>>>>>>>>> Adjecent SP PC: 1606 UP!!!
>>>>>>>>>>>>>>> LINKSET UP DELAYING RESETTING
>>>>>>>>>>>>>>> --- SS7 Up ---
>>>>>>>>>>>>>>> Resetting CICs 2 to 31
>>>>>>>>>>>>>>> Resetting CICs 3202 to 3231
>>>>>>>>>>>>>>> Got reset acknowledgement from CIC 2 to 31 DPC: 1600
>>>>>>>>>>>>>>> Got reset acknowledgement from CIC 3202 to 3231 DPC: 1600
>>>>>>>>>>>>>>> MTP2 link up (SLC -1214249800)
>>>>>>>>>>>>>>> Changeback started on link SLC 0 PC 1606
>>>>>>>>>>>>>>> Changeback completed on link SLC: 0 PC: 1606
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks in advanced.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>> Peter
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>
>>>
>>
>
>




[Index of Archives]     [Asterisk App Development]     [PJ SIP]     [Gnu Gatekeeper]     [IETF Sipping]     [Info Cyrus]     [ALSA User]     [Fedora Linux Users]     [Linux SCTP]     [DCCP]     [Gimp]     [Yosemite Backpacking]     [Deep Creek Hot Springs]     [Yosemite Campsites]     [ISDN Cause Codes]     [Asterisk Books]

  Powered by Linux