On 2013-08-13 14:12, Frederic Van Espen wrote: > > adjpointcode=12248 > sigchan=1 > #include ss7.timers > sigchan=32 > #include ss7.timers > > adjpointcode=12198 > sigchan=63 > #include ss7.timers > sigchan=94 > #include ss7.timers you don't need multiple includes for the timers - just one per linkset ... the last one should be enough > > for pointcode 12198, the state seems to remain DOWN indefinitely. I'm > not sure however if this is due to our setup or due to a > misconfiguration on the other side. > > I'm also constantly receiving REL messages on the link to pointcode > 12198. These result in errors in the asterisk logs: > [Aug 13 13:07:07] ERROR[28543] chan_dahdi.c: [1] Got ISUP message on > link while MTP3 state is not UP! > [Aug 13 13:07:07] ERROR[28543] chan_dahdi.c: [1] Got ISUP message on > link while MTP3 state is not UP! > [Aug 13 13:07:07] ERROR[28543] chan_dahdi.c: [1] Got ISUP message on > link while MTP3 state is not UP! > [Aug 13 13:07:07] ERROR[28543] chan_dahdi.c: [1] Got ISUP message on > link while MTP3 state is not UP! > [Aug 13 13:07:07] ERROR[28543] chan_dahdi.c: [1] Got ISUP message on > link while MTP3 state is not UP! > [Aug 13 13:07:07] ERROR[28543] chan_dahdi.c: [1] Got ISUP message on > link while MTP3 state is not UP! > [Aug 13 13:07:07] ERROR[28543] chan_dahdi.c: [1] Got ISUP message on > link while MTP3 state is not UP! > As Attila Domjan pointed in his email you may reduce the mtp3_timer.t21 value or just leave it to the default 63sec and 12198 should became UP after that timeout > > Thanks, > > Frederic > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
![]() |