Tried setting dchan=1 instead of mtp2=1 and still get the same result. On Mon, Oct 1, 2012 at 10:58 AM, Kaloyan Kovachev <kkovachev at varna.net>wrote: > Hi, > i think that mtp2=1 works only with Digium cards and you need to use > dchan=1 instead > > On Mon, 1 Oct 2012 10:44:41 +0200, Torrey Searle <tsearle at gmail.com> > wrote: > > With wanpipe cards, I believe you need to also configure the timing > > information into the wanpipe config files too. > > (/etc/wanpipe/wanpipe*.conf) > > > > Torrey > > > > On 1 October 2012 09:11, Victor Neiman <victor at blacksheepdev.co.za> > wrote: > >> Hi, > >> > >> I'm trying to get SS7 communication between Asterisk 1.8.16.0 which has > >> libss7 installed and the Mobicents Signalling Gateway , using Sangoma > >> A101 > >> hardware in two boxes. Both boxes are using wanrouter and dahdi. One > >> box is > >> running Asterisk, the other Mobicents. I have been corresponding > closely > >> with people at Mobicents to get the configuration right for their > >> software > >> and am fairly sure it is correct. The problem is that when I start up > the > >> Mobicents Signalling Gateway, Asterisk on the other side immediately > >> fills > >> up with these errors: > >> > >>> [Oct 1 10:55:46] NOTICE[19825]: chan_dahdi.c:3437 > >>> my_handle_link_exception: SS7 got event: HDLC Abort(6) on span 1/0 > >> > >> > >> > >> The box that is running the SGW has the following > /etc/dahdi/system.conf: > >> > >>> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit > >>> #autogenrated on 2012-09-28 > >>> #Dahdi Channels Configurations > >>> #For detailed Dahdi options, view /etc/dahdi/system.conf.bak > >>> loadzone=us > >>> defaultzone=us > >>> > >>> #Sangoma A101 port 1 [slot:4 bus:5 span:1] <wanpipe1> > >>> span=1,1,0,ccs,hdb3,crc4 > >>> bchan=1-31 > >> > >> > >> This config comes straight from the guys at Mobicents. All channels are > >> bchan. > >> > >> The Asterisk side looks like this, /etc/dahdi/sysem.conf > >> > >>> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit > >>> #autogenrated on 2012-09-28 > >>> #Dahdi Channels Configurations > >>> #For detailed Dahdi options, view /etc/dahdi/system.conf.bak > >>> loadzone=us > >>> defaultzone=us > >>> > >>> #Sangoma A101 port 1 [slot:4 bus:2 span:1] <wanpipe1> > >>> span=1,0,0,ccs,hdb3,crc4 > >>> bchan=2-31 > >>> mtp2=1 > >> > >> > >> /etc/asterisk/chan_dahdi,conf looks like this: > >> > >>> ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit > >>> ;autogenrated on 2012-09-28 > >>> ;Dahdi Channels Configurations > >>> ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak > >>> > >>> [trunkgroups] > >>> > >>> [channels] > >>> context=default > >>> usecallerid=yes > >>> hidecallerid=no > >>> callwaiting=yes > >>> usecallingpres=yes > >>> callwaitingcallerid=yes > >>> threewaycalling=yes > >>> transfer=yes > >>> canpark=yes > >>> cancallforward=yes > >>> callreturn=yes > >>> echocancel=yes > >>> echocancelwhenbridged=yes > >>> relaxdtmf=yes > >>> rxgain=0.0 > >>> txgain=0.0 > >>> group=1 > >>> callgroup=1 > >>> pickupgroup=1 > >>> immediate=no > >>> > >>> ;Sangoma A102 port 1 [slot:2 bus:6 span:1] <wanpipe1> > >>> context=from-pstn > >>> group=0 > >>> echocancel=no > >>> signaling=ss7 ;this is ss7 signaling > >>> ss7type=itu ;using the ITU variant > >>> ss7_called_nai=dynamic ;NAI for outgoing calls > >>> ss7_calling_nai=dynamic ;NAI for incoming calls > >>> ss7_internationalprefix=00 ;international prefix value for incoming > >>> calls > >>> ss7_nationalprefix=0 ;national prefix value for incoming calls > >>> ss7_subscriberprefix= ;subscriber prefix value for incoming calls > >>> ss7_unknownprefix= ;unknown prefix value for incoming calls > >>> ss7_explictacm=yes ;ACM is send as soon as call enters the dial > >>> plan...may > >>> not accepted yet though > >>> linkset=1 ;arbitrary name for this set of channels > >>> pointcode=1 ;the point code for this system...aka SPC > >>> adjpointcode=2 ;the point code for the system that we are signaling > >>> to... > >>> aka APC > >>> defaultdpc=2 ;the point code for the system that the CICs will be > >>> negotiated with...aka DPC > >>> networkindicator=international ;NI value for MTP3 > >>> cicbeginswith=1 ;the starting value of the CICs > >>> channel=2-31 ;the channels that are CICs > >>> sigchan=1 ;the signaling channel > >> > >> > >> Any help would be appreciated. Feels like I'm missing something in the > >> configs but I just can't seem to pin it down. > >> > >> Regards > >> Victor > >> > >> > >> > >> -- > >> _____________________________________________________________________ > >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > >> asterisk-ss7 mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20121001/be047c8e/attachment.htm>
|