Hi , If you have single point code (adjpointcode) then it's ok . Also you try single sigchan for all 8 port. On Fri, Jun 1, 2012 at 6:48 AM, Luis Marcelo <mbaldi at gmail.com> wrote: > Hey guys, > I wanted to get some advice for an upgrade we have in mind: > Scenario: We have 1 server with 2xA104d Sangoma cards (8E1s total) Our > setup has 1 sig chan per card (chans 16 and 140) . Right now we rarely use > more than 3 E1s but we are expecting a major traffic increase in the > following days so we got ourselves another server with identical hardware. > > these are the config files: > > *system.conf:* > > loadzone=us > defaultzone=us > > #Sangoma A104 port 1 [slot:1 bus:13 span:1] <wanpipe1> > span=1,1,0,ccs,hdb3 > bchan=1-15,17-31 > mtp2=16 > > #Sangoma A104 port 2 [slot:1 bus:13 span:2] <wanpipe2> > span=2,2,0,ccs,hdb3 > bchan=32-62 > > #Sangoma A104 port 3 [slot:1 bus:13 span:3] <wanpipe3> > span=3,3,0,ccs,hdb3 > bchan=63-93 > > #Sangoma A104 port 4 [slot:1 bus:13 span:4] <wanpipe4> > span=4,4,0,ccs,hdb3 > bchan=94-124 > > #Sangoma A104 port 1 [slot:4 bus:15 span:5] <wanpipe5> > span=5,5,0,ccs,hdb3 > bchan=125-139,141-155 > mtp2=140 > > #Sangoma A104 port 2 [slot:4 bus:15 span:6] <wanpipe6> > span=6,6,0,ccs,hdb3 > bchan=156-186 > > #Sangoma A104 port 3 [slot:4 bus:15 span:7] <wanpipe7> > span=7,7,0,ccs,hdb3 > bchan=187-217 > > #Sangoma A104 port 4 [slot:4 bus:15 span:8] <wanpipe8> > span=8,8,0,ccs,hdb3 > bchan=218-248 > > *chan_dahdi.conf:* > > [trunkgroups] > > [channels] > context=ctx1 > language=en > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > > networkindicator=National > ss7_called_nai=National ;dynamic > ss7_calling_nai=National ;dynamic > ss7_internationalprefix = > ss7_nationalprefix = > signalling = ss7 > ss7type = itu > linkset = 1 > pointcode = 200 > adjpointcode = 300 > defaultdpc = 300 > slc=0 > > ;Sangoma A104 port 1 [slot:1 bus:13 span:1] <wanpipe1> > cicbeginswith = 1 > channel => 1-15 > cicbeginswith = 17 > channel => 17-31 > sigchan = 16 > > ;Sangoma A104 port 2 [slot:1 bus:13 span:2] <wanpipe2> > cicbeginswith = 33 > channel => 32-62 > > ;Sangoma A104 port 3 [slot:1 bus:13 span:3] <wanpipe3> > cicbeginswith = 65 > channel => 63-93 > > ;Sangoma A104 port 4 [slot:1 bus:13 span:4] <wanpipe4> > cicbeginswith = 97 > channel => 94-124 > > ;Sangoma A104 port 1 [slot:4 bus:15 span:5] <wanpipe5> > cicbeginswith = 129 > channel => 125-139 > cicbeginswith = 145 > channel => 141-155 > sigchan = 140 > > ;Sangoma A104 port 2 [slot:4 bus:15 span:6] <wanpipe6> > cicbeginswith = 161 > channel => 156-186 > > ;Sangoma A104 port 3 [slot:4 bus:15 span:7] <wanpipe7> > cicbeginswith = 193 > channel => 187-217 > > ;Sangoma A104 port 4 [slot:4 bus:15 span:8] <wanpipe8> > cicbeginswith = 225 > channel => 218-248 > > Now, two questions: > > 1. It seems to me that I should configure the 2nd server almost identical > to the first except the CIC numbering, wich should now start a CIC 249, > Something like this: > > ;span1 > cicbeginswith = 249 > channel => 1-15 > cicbeginswith = 265 > channel => 17-31 > sigchan = 16 > > ;span2 > cicbeginswith = 281 > channel => 32-62 > > ;span3 > cicbeginswith = 313 > channel => 63-93 > > ;span4 > cicbeginswith = 345 > channel => 94-124 > > ;span5 > cicbeginswith = 377 > channel => 125-139 > cicbeginswith = 393 > channel => 141-155 > sigchan = 140 > > ;span6 > cicbeginswith = 409 > channel => 156-186 > > ;span7 > cicbeginswith = 441 > channel => 187-217 > > ;span8 > cicbeginswith = 473 > channel => 218-248 > > is this correct? > > 2. Would it be at all possible for both servers to handle half the traffic > at all times? (right now the switch assigns the first call to CIC 248, the > 2nd to 247 an so on) should we assign say CIC 248 to server 1 and 247 to > server2? > > I'm using Asterisk1.6.0.20, dahdi 2.5.0.2 and libss7-1.0.2 > Also the sangoma drivers are Wanpipe 3.5.24 > > thanks in advance! > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- BIPIN RAGHUVANSHI OPERATION HEAD ASTERISK (DEVELOPMENT AND RESEARCH) WWW.EHORIZONS.IN 011-32323262 011-46334633 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120601/cad0c249/attachment.htm>
|