Hi, I added: ss7_nationalprefix=N and I am not seeing N. Unless N needs to be a digit and not the actual letter N? Regards, Dovid -----Original Message----- From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Torrey Searle Sent: Thursday, April 05, 2012 20:12 To: asterisk-ss7 at lists.digium.com Subject: Re: Variable if call is national or not I see no reason dynamic should not work for you. N will be added to anything received with a national cli. but you will need to be sure to prefix your dialed number and callerid with N if you want the nai to be properly set on outbound calls. On 05/04/2012, Dovid B <ast-ss7 at dovid.net> wrote: > Hi, > > Here is my config: > > signalling = ss7 > ss7type = itu > networkindicator = national > linkset = 1 > pointcode = 1607 > adjpointcode = 9402 > defaultdpc = 9402 > cicbeginswith = 1 > channel=1-15 > cicbeginswith = 17 > channel = 17-31 > sigchan = 16 > group=0 > > ss7_called_nai=national > ss7_calling_nai=national > > I don?t remember why but I know that to work with our carrier I needed both > ss7_called_nai and ss7_calling_nai to be set to national. Now if I > understand correctly this is for calls TO my carrier? For calls FROM my > carrier I can set ss7_nationalprefix=N and then any caller ID or DID that > has N in front I know it is a national call? > > Regards, > > Dovid > > > -----Original Message----- > From: asterisk-ss7-bounces at lists.digium.com > [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Torrey Searle > Sent: Monday, April 02, 2012 10:01 > To: asterisk-ss7 at lists.digium.com > Subject: Re: [asterisk-ss7] Variable if call is national or not > > If you set the > calling ss7_calling_nai=dynamic > > in dahdi.conf then you can easily tell the NAI by prefix analysis > > libss7 will prefix the number with ss7_subscriberprefix > ss7_nationalprefix or ss7_internationalprefix depending on the nai > > Torrey > > On 29 March 2012 10:31, Kaloyan Kovachev <kkovachev at varna.net> wrote: >> On Thu, 29 Mar 2012 09:59:03 +0200, "Dovid B" <ast-ss7 at dovid.net> wrote: >>> Hi, >>> >>> >>> >>> Is there some sort of variable that will let me know if the calling >> party's >>> number is in national format or not? >>> >> >> There is no such variable set by default, but you may: >> ?1. use ss7 debug and look at the incoming message for nai >> ?2. patch the code to get SS7_NAI_XXX from ss7->calling_nai >> ?3. easy do this in dialplan by setting ss7_XXXprefix for the linkset and >> match by that variable. For example if you set ss7_nationalprefix = N the >> incoming call to 12345 will go to extension N12345 the same goes for the >> calling party - it will be N54321 >> >> It depends what are you after >> >>> >>> >>> Regards, >>> >>> >>> >>> Dovid >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
|