Glad to hear that.
Regards
Gustavo
On Jul 26, 2012, at 3:32 PM, Marcus Vinicius wrote:
> Hi Gustavo / Kaloyan ,
>
> >> On Thu, 26 Jul 2012 12:54:58 -0300, Gustavo M?rsico
> >> <gustavomarsico at gmail.com> wrote:
> >> I faced a similar issue recently and was related to the Screening
> >> Indicator. Was solved adding before Dial the following line:
> >>
> >> Set(CALLERPRES()=allowed) or Set(CALLERPRES()= prohib)
> >>
> >> In both cases the important was the 2 bits saying "network provided".
> >>
> >> Hope this helps.
> >>
> >
> > Not sure about the Brazil variant, but ITU-T Q.764 defines the en-block
> > dialing to end with ST.
> > 0xf is ST signal it means 'end of dialing' or 'number is complete', so it
> > should understand it and your problem is probably somewhere else.
> >
> > As Johann Steinwendtner have noted you receive the number without leading
> > 0, but you send it with 0 - this or as Gustavo suggested
> > Screening/Presentation may be the problem.
>
> Great!!!
>
> Set(CALLERPRES()=allowed) works cooler.
>
> -- Executing [0151135001019 at from-1002:2] Set("SIP/1002-00000024", "CALLERPRES()=allowed") in new stack
> -- Executing [0151135001019 at from-1002:3] Dial("SIP/1002-00000024", "DAHDI/r3/0151135001019,40") in new stack
> [3] Len = 38 [ b1 34 23 85 99 8f dc f0 0f 00 01 00 60 01 0a 00 02 0b 09 04 10 10 15 31 05 10 10 f9 0a 07 04 13 71 53 00 01 20 00 ]
> [3] FSN: 52 FIB 0
> [3] BSN: 49 BIB 1
> [3] >[0] MSU
> [3] [ b1 34 23 ]
> [3] Network Indicator: 2 Priority: 0 User Part: ISUP (5)
> [3] [ 85 ]
> [3] OPC 882 DPC 3993 SLS 15
> [3] [ 99 8f dc f0 ]
> [3] CIC: 15
> [3] [ 0f 00 ]
> [3] Message Type: IAM
> [3] [ 01 ]
> [3] --FIXED LENGTH PARMS[4]--
> [3] Nature of Connection Indicator:
> [3] Satellites in connection: 0
> [3] Continuity Check: Check not required (0)
> [3] Outgoing half echo control device: not included (0)
> [3] [ 00 ]
> [3] Forward Call Indicators:
> [3] Nat/Intl Call Ind: call to be treated as a national call (0)
> [3] End to End Method Ind: no end-to-end method(s) available (0)
> [3] Interworking Ind: no interworking encountered (0)
> [3] End to End Info Ind: no end-to-end information available (0)
> [3] ISDN User Part Ind: ISDN user part used all the way (1)
> [3] ISDN User Part Pref Ind: ISDN user part not preferred all the way (1)
> [3] ISDN Access Ind: originating access ISDN (1)
> [3] SCCP Method Ind: no indication (0)
> [3] [ 60 01 ]
> [3] Calling Party's Category:
> [3] Category: Ordinary calling subscriber (10)
> [3] [ 0a ]
> [3] Transmission Medium Requirements:
> [3] Speech (0)
> [3] [ 00 ]
> [3] --VARIABLE LENGTH PARMS[1]--
> [3] Called Party Number:
> [3] Nature of address: 4
> [3] NI: 0
> [3] Numbering plan: 1
> [3] Address signals: 0151135001019#
> [3] [ 09 04 10 10 15 31 05 10 10 f9 ]
> [3] --OPTIONAL PARMS--
> [3] Calling Party Number:
> [3] Nature of address: 4
> [3] NI: 0
> [3] Numbering plan: 1
> [3] Presentation: 0
> [3] Screening: 3
> [3] Address signals: 1735001002
> [3] [ 0a 07 04 13 71 53 00 01 20 ]
> [3]
> -- Called DAHDI/r3/0151135001019
> [3] Len = 14 [ 34 b2 0b 85 72 43 e6 f3 0f 00 06 16 04 00 ]
> [3] FSN: 50 FIB 1
> [3] BSN: 52 BIB 0
> [3] <[0] MSU
> [3] [ 34 b2 0b ]
> [3] Network Indicator: 2 Priority: 0 User Part: ISUP (5)
> [3] [ 85 ]
> [3] OPC 3993 DPC 882 SLS 15
> [3] [ 72 43 e6 f3 ]
> [3] CIC: 15
> [3] [ 0f 00 ]
> [3] Message Type: ACM
> [3] [ 06 ]
> [3] --FIXED LENGTH PARMS[1]--
> [3] Backward Call Indicator:
> [3] Charge indicator: 2
> [3] Called party's status indicator: 1
> [3] Called party's category indicator: 1
> [3] End to End method indicator: 0
> [3] Interworking indicator: 0
> [3] End to End information indicator: 0
> [3] ISDN user part indicator: 1
> [3] Holding indicator: 0
> [3] ISDN access indicator: 0
> [3] Echo control device indicator: 0
> [3] SCCP method indicator: 0
> [3] [ 16 04 ]
> [3]
> Linkset 3: Processing event: ISUP_EVENT_ACM
>
>
> thank you so much for your help.
>
>
> --
> Marcus
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120726/759773cd/attachment-0001.htm>
|