Check the jumper settings on the e1 card that sets e1 or t1 -Vashkar On Jul 24, 2011 9:25 PM, "Dave George" <dgeorge at teletoneinc.com> wrote: > Seems the card on span 9 switched from T1 to E1 after power failed. How do > I set it back to T1 using config? > > > > Dave > > > > > > > > From: Dave George [mailto:dgeorge at teletoneinc.com] > Sent: Sunday, July 24, 2011 11:22 AM > To: 'asterisk-ss7 at lists.digium.com' > Subject: DAHDI_SPANCONFIG failed on span 9: Invalid argument (22) > > > > System was up and running well for over a year. I had a power outage and > now I cannot get my SS7 back up. > > > > > > service dahdi restart > > Unloading DAHDI hardware modules: done > > Loading DAHDI hardware modules: > > wct4xxp: [ OK ] > > > > Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 9: Invalid argument (22) > > [FAILED] > > > > > > > > > > > > Channel 288: Clear channel (Default) (Echo Canceler: none) (Slaves: 288) > > > > 288 channels to configure. > > > > DAHDI_SPANCONFIG failed on span 9: Invalid argument (22) > > > > Any advice welcome. > > > > > > System.conf > > span=1,1,0,esf,b8zs > > bchan=2-24 > > mtp2=1 > > > > span=2,1,0,esf,b8zs > > bchan=26-48 > > mtp2=25 > > > > span=3,1,0,esf,b8zs > > bchan=49-72 > > > > span=4,1,0,esf,b8zs > > bchan=73-96 > > > > span=5,1,0,esf,b8zs > > bchan=97-120 > > > > span=6,1,0,esf,b8zs > > bchan=121-144 > > > > span=7,1,0,esf,b8zs > > bchan=145-168 > > > > span=8,1,0,esf,b8zs > > bchan=169-192 > > > > span=9,1,0,esf,b8zs > > bchan=193-216 > > > > span=10,1,0,esf,b8zs > > bchan=217-240 > > > > span=11,1,0,esf,b8zs > > bchan=241-264 > > > > span=12,1,0,esf,b8zs > > bchan=265-288 > > > > Dave > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110724/670b8bb3/attachment.htm>
|