modprobe wct4xxp t1e1override=0x00 worked for me.
But to get all the spans to change to T1 first I had to set them all to E1
and then Set them all to T1 using
Service dahdi stop
modprobe wct4xxp t1e1override=0xFF (Set all to E1)
dahdi_cfg -vvv
service dahdi start
service dahdi stop
modprobe wct4xxp t1e1override=0x00 (Set all to T1)
dahdi_cfg -vvv
service dahdi start
Dave
From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx
[mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Dave George
Sent: Sunday, July 24, 2011 11:25 AM
To: asterisk-ss7 at lists.digium.com
Subject: Re: DAHDI_SPANCONFIG failed on span 9: Invalid
argument (22)
Seems the card on span 9 switched from T1 to E1 after power failed. How do
I set it back to T1 using config?
Dave
From: Dave George [mailto:dgeorge@xxxxxxxxxxxxxxx]
Sent: Sunday, July 24, 2011 11:22 AM
To: 'asterisk-ss7 at lists.digium.com'
Subject: DAHDI_SPANCONFIG failed on span 9: Invalid argument (22)
System was up and running well for over a year. I had a power outage and
now I cannot get my SS7 back up.
service dahdi restart
Unloading DAHDI hardware modules: done
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 9: Invalid argument (22)
[FAILED]
Channel 288: Clear channel (Default) (Echo Canceler: none) (Slaves: 288)
288 channels to configure.
DAHDI_SPANCONFIG failed on span 9: Invalid argument (22)
Any advice welcome.
System.conf
span=1,1,0,esf,b8zs
bchan=2-24
mtp2=1
span=2,1,0,esf,b8zs
bchan=26-48
mtp2=25
span=3,1,0,esf,b8zs
bchan=49-72
span=4,1,0,esf,b8zs
bchan=73-96
span=5,1,0,esf,b8zs
bchan=97-120
span=6,1,0,esf,b8zs
bchan=121-144
span=7,1,0,esf,b8zs
bchan=145-168
span=8,1,0,esf,b8zs
bchan=169-192
span=9,1,0,esf,b8zs
bchan=193-216
span=10,1,0,esf,b8zs
bchan=217-240
span=11,1,0,esf,b8zs
bchan=241-264
span=12,1,0,esf,b8zs
bchan=265-288
Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110724/3e5bbc15/attachment.htm>
|