Yes, i'm using asterisk : 1.6.0.9
libss7 (1.0.2)- Attila's Version
https://observer.router.hu/repos_pub/libss7/trunk/
May be this version of libss7 can help you!
On 01/13/2011 01:23 PM, Vahan Yerkanian wrote:
> On 1/13/11 11:37 AM, peterpet wrote:
>> Hi, look my debug :
>>
>>
>> Chan_dahdi.conf
>>
>> language=en
>> relaxdtmf=yes
>> context=telecom_1
>> switchtype=euroisdn
>> usecallerid=yes
>> callwaiting=yes
>> usecallingpres=yes
>> signalling=ss7
>> group=3
>> ss7type = itu
>> ;ss7_explicitacm=yes
>> ;ss7_autoacm=yes
>> ss7_called_nai=dynamic
>> ss7_calling_nai=national
>> ss7_nationalprefix=0
>> ss7_internationalprefix=00
>> ss7_networkroutedprefix=iwillnotusethisnai
>> ss7_unknownprefix=iwillnotusethisnai
>> ss7_subscriberprefix=112
>> linkset = 3
>> pointcode = XXXX
>> adjpointcode = XXX
>> defaultdpc = XXX
>> networkindicator=national
>> cicbeginswith = 1
>> channel = 63-77
>> cicbeginswith = 17
>> channel = 79-93
>> sigchan = 78
>> mtp3_timer.t21 = 63000
>> isup_timer.digittimeout = 500
>>
>> In this situation my telco want to be 112 (EU emergency call) a
>> subscriber and everithing is OK. Do you restart asterisk after
>> replacing settings in your config? And i think your dialplan will be
>> like this
>> _1XX => {
>> Dial(DAHDI/g2/1${EXTEN},60);
>> Hangup;
>> }
> I have identical config now to yours, and I get this when I try your
> suggested dialplan's 1${EXTEN}:
>
> --VARIABLE LENGTH PARMS[1]--
> Called Party Number:
> Nature of address: 1
> NI: 0
> Numbering plan: 1
> Address signals: 1109#
> [ 05 81 10 11 90 0f ]
>
> I'm running the stock libss7 1.0.2 with 1.6.2.15 from Digium's CentOS
> repo, are you using a modified libss7?
>
> Thanks,
> Vahan
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
|