On Sun, Jan 9, 2011 at 23:18, Benaiad <benaiad at gmail.com> wrote: > Hi, > > ;First of all, I'm newbie in this field, so please forgive > my unprofessional explanation. > > I'm trying to connect to a mobile operator with chan_ss7 using sangoma > card. > the telecom regulator initiated an SPC code for us > Now, the operator's engineer asked me for the following parameters: > OPC , Link type , TS , SLC. > Ideally, they should give a Point Code for you as well, if they don't, you can choose any arbitrary figure like "1234" or "1" or "69". > but I don't know what should I provide to him. > I think the OPC similar to our SPC, And the Link type is 64k, > But for TS and SLC, I don't know what to say. > TS is the timeslot/chan on which you will send signalling. On each E1 you have 31 TS. Normally 16 is used, although you can use any 1 to 31. Use SLC=0 for the first link. > > I appreciate and applaud your help and concern. > > Thank you all. > > Regards, > -- > Benaiad > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ... -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110110/4259faa8/attachment.htm>
|