2011/4/30 Anita Hall <anita.hall at simmortel.com> > Hi > > I am running a massive 100 E1 lines over SS7, distributed over 7 boxes with > only 2 signaling links. > > I am trying to get mtp3d and chan_ss7 work for 2 signaling links across 7 > boxes. > > 100 E1 should work with 2 signalling links, as long you don't have to many CPS. But, 100 / 7 ~= 15 E1 per box, i think its too much. try to narrow down this. some 'years' ago i've faced similar problem, and well used TDM gateway with many E1s and DSP on board. Price level of such gateways is when comparing to 25 Digium's TE400P + 25 good servers, at least power consumption beats you. Anyway, the chan_ss7 is comericial product from Dicea, you could obtain help there? try simple think, is debian a host name put in /etc/hosts? is a port 12000 realy open? mtp3_connect_socket: Could not connect to hostname/IP address 'debian', port '12000' ssh to host debian, and run netstat, why you bring firewall level & nmap when you are not sure if some process is really running on that host and it has opened a tcp socket? the log: Apr 30 03:22:35 [ERROR] mtp3io.c:84 setup_socket Cannot bind receiver socket, errno=98: Address already in use really says that shometing has already used this port, so netstat -a -n | grep 12000 for a start, ok? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110430/2c741a1e/attachment.htm>
|