Awesome. Mystery solved, and everyone learned something on the way :) Bryan Scott wrote: > On May 3, 2010, at 11:11 AM, Matthew Fredrickson wrote: > >> Bryan Scott wrote: >> >>> They do match.... I have them separated by "pointcode"... >>> >>> Switched back to 1.6.2.6 (1.6.1.18 was giving me grief on some SIP RTP stuff). >>> >>> >>> On Mon, May 3, 2010 at 6:36 AM, Paul Timmins <paul at timmins.net> wrote: >>> >>>> Why do defaultdpc and adjpointcode not match? Do you have an stp between? >>>> >> Can you post a debug of the messages using "ss7 debug linkset x" where x >> is the linkset number? >> >> >> > > UGHHH!H!H!!! > > Ok. Well, in troubleshooting everything *else*, I neglected to take a close look at the point codes. Yeah.... I put a 2 where I should have put a 7. Changed that, reloaded chan_dahdi, and voila: > > ==================== > > Loaded chan_dahdi.so => (DAHDI Telephony Driver w/PRI & SS7) > == Primary D-Channel on span 1 up > MTP2 link up (SLC 0) > --- SS7 Up --- > Resetting CICs 25 to 47 > Got reset acknowledgement from CIC 25 to 47. > > ==================== > > > And all alarms have cleared on the switch and tests are passing: > > > ==================== > << Query Circuit ... > << PC: 1 - 1 - 10, CIC: 00025 > >>> T7000 ISUP Circuit Query >>> >>> Circuit Near End State Far End State >>> *************************************************** >>> 0025 idle idle >>> > << Query Circuit Range ... > << PC: 1 - 1 - 10, CIC: 00025, 00026, 00027, 00028, 00029, 00030, 00031, 00032, 00033, 00034, 00035, 00036, 00037, 00038, 00039, 00040, 00041, 00042, 00043, 00044, 00045, 00046, 00047 > >>> T7000 ISUP Circuit Query >>> >>> Circuit Near End State Far End State >>> *************************************************** >>> 0025 idle idle >>> 0026 idle idle >>> 0027 transient idle >>> 0028 transient idle >>> 0029 transient idle >>> 0030 transient idle >>> 0031 transient idle >>> 0032 transient idle >>> 0033 transient idle >>> 0034 transient idle >>> 0035 transient idle >>> 0036 transient idle >>> 0037 transient idle >>> 0038 transient idle >>> 0039 transient idle >>> 0040 transient idle >>> 0041 transient idle >>> 0042 transient idle >>> 0043 transient idle >>> 0044 transient idle >>> 0045 transient idle >>> 0046 transient idle >>> 0047 transient idle >>> > > << Circuit Continuity Check Request ... > << PC: 1 - 1 - 10, CIC: 00047 > >>> --------------------------------------------------- >>> T7000 ISUP COT PASSED >>> PC:CIC (1-1-10:47), CID: (22) >>> --------------------------------------------------- >>> > > > << Test Circuit ... > << PC: 1 - 1 - 10, CIC: 00047 > >>> OCX Circuit Validation Test >>> ************************************************ >>> circuit 47 success. >>> Circuit Group Carrier -> unknown >>> Double Seizing Control -> none >>> Alarm Carrier -> unknown >>> Cot Check Req -> unknown >>> > << Reset Circuit ... > << PC: 1 - 1 - 10, CIC: 00047 > > > > >
![]() |