On 2/24/10 6:17 PM, Marcelo Pacheco wrote: > That means you know next to nothing of dadhi E1 ss7. > Then you probably shouldn't be messing with ss7/isup. > If you can't understand the configuration, you shouldn't be following > somebody else's cookbook and hope everything will be fine. > ss7/isup is a telephony network protocol, not just an end user one, > isn't like ISDN... It requires actual knowledge of the tecnology to > operate without major potential issues. It's easy to mess up... > Sorry about the venting, I'm TIRED of all this lazy people that expect > free help on something they should understand themselves. > Your reply is the same as if I offered you a script to connect ports 1 > and 4 of a 4 span card and you have a 2 span card, and you discard the > tip because you can't do basic math... > > GOOD LUCK... YOU'LL NEED IT... Thanks for littering the mailing list archive. I'm sure you'll get treated the same way some day. If you have had spent a minute and read my chan_dahdi.conf config, you'd see that I'm using a similar config to yours. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100224/60b9c18d/attachment.htm