hi, i'm using E1 and my configuration working good, i hope this is can help as reference. Using 1 pointcode for 2 asterisk server, both using 1 timeslot for signalling. i use sls => 0 at 1st server and sls => 1 at 2nd server. Communication between server using mtp3d. [linkset-siuc] enabled => yes enable_st => no use_connect => yes hunting_policy => seq_htl ;hunting_policy => even_mru subservice => auto context => ss7 language => en [link-l1] linkset => siuc channels => 1-15,17-31 sls => 0 schannel => 16 at host1:12000 firstcic => 1 enabled => yes [link-l2] linkset => siuc channels => 1-31 schannel => firstcic => 33 enabled => yes [link-l3] linkset => siuc channels => 1-31 schannel => firstcic => 65 enabled => yes [link-l4] linkset => siuc channels => 1-31 schannel => firstcic => 97 enabled => yes [link-l5] linkset => siuc channels => 1-15,17-31 sls => 1 schannel => 16 at host2:12000 firstcic => 129 enabled => yes [link-l6] linkset => siuc channels => 1-31 schannel => firstcic => 161 enabled => yes [link-l7] linkset => siuc channels => 1-31 schannel => firstcic => 193 enabled => yes [link-l8] linkset => siuc channels => 1-31 schannel => firstcic => 225 enabled => yes [host-host1] enabled => yes default_linkset => siuc opc => 6133 dpc => siuc:6154 links => l1:1,l2:2,l3:3,l4:4 if-1 => 10.0.0.1 [host-host2] enabled => yes default_linkset => siuc opc => 6133 dpc => siuc:6154 links => l5:1,l6:2,l7:3,l8:4 if-1 => 10.0.0.2 [jitter] jbenable = yes jbmaxsize = 1000 jbresyncthreshold = 1000 jbimpl = adaptive Dave George wrote: > Hi, > > I am using two T1 for SS7 on the same box. Both T1s are using the same point codes. I have each T1 setup as its own linkset (Linkset 1 and linkset 2). > > The second linkset is not coming up. > > Is there any thing wrong with my config or setup? Can I have both T1s usins the same point code. I did it this way so that if 1 T1 goes down the second linkset and T1 stays up. > > [trunkgroups] > [channels] > > context=in_dahdi > > switchtype=national > > usecallerid=yes > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > signalling = ss7 > ss7type = ansi > > > > > > group=1 > callgroup=1 > pickupgroup=1 > ss7_called_nai=dynamic > ss7_calling_nai=dynamic > ss7_internationalprefix = 00 > ss7_nationalprefix = 0 > > ; All settings apply to linkset 1 > linkset = 1 > context=in_dahdi > pointcode = 157 > adjpointcode = 163 > defaultdpc = 163 > networkindicator=national > cicbeginswith = 102 > channel = 2-24 > sigchan = 1 > > > group = 2 > linkset = 2 > context=in_dahdi > pointcode = 157 > adjpointcode = 163 > defaultdpc = 163 > networkindicator=national > cicbeginswith = 126 > channel = 26-48 > sigchan = 25 > > > > > Thanks, > Dave George > Teletone Inc. > 561 674 3838 > > > > > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2674 - Release Date: 02/07/10 19:35:00 > > =============================== Nikmati Bulan C'RITA Flexi (biCara iRIt Tiga rAtus rupiah) Cuma Rp 300,- sepuasnya sekali bicara ke sesama mulai pukul 23.00-09.00, untuk SLJJ gunakan 01017. Bicara di bawah 6 Menit tarif tetap Rp 49/menit (Des s.d Feb'10). =============================== This Email Has been scanned : Anti Virus =============================== -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100208/a7920e5f/attachment-0001.htm
|