The linkset is up but it seems as if the second D channel on slot 25 is not aligning. I am using 1 linkset and I am able to pass calls on both T1s. I am getting the following error: aislecomss72*CLI> ss7 debug linkset 1 Enabled debugging on linkset 1 Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED aislecomss72*CLI> ss7 show linkset 1 SS7 linkset 1 status: Up Is there a more detailed debug level that can tell me exactly why I am getting this msg. This is my system.conf span=1,1,0,esf,b8zs span=2,1,0,esf,b8zs bchan=2-24 mtp2=1 bchan=26-48 mtp2=25 [channels] context=in_dahdi switchtype=dms100 usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes signalling = ss7 ss7type = ansi group=1 callgroup=1 pickupgroup=1 ss7_called_nai=dynamic ss7_calling_nai=dynamic ss7_internationalprefix = 00 ss7_nationalprefix = 0 ; All settings apply to linkset 1 linkset = 1 context=in_dahdi pointcode = 002-157-001 adjpointcode = 001-163-000 defaultdpc = 001-163-000 networkindicator=national slc=0 cicbeginswith = 102 sigchan = 1 channel = 2-24 slc=1 cicbeginswith = 126 sigchan = 25 channel = 26-48 Thanks, Dave From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of bipin singh Sent: Friday, February 05, 2010 11:44 PM To: asterisk-ss7 at lists.digium.com Subject: Re: SS7 2 T1s >>> 2 linksets same point code you need 2 pointcode for two ss7 link. On Fri, Feb 5, 2010 at 9:22 PM, Dave George <dgeorge at teletoneinc.com> wrote: Hi, I am using two T1 for SS7 on the same box. Both T1s are using the same point codes. I have each T1 setup as its own linkset (Linkset 1 and linkset 2). The second linkset is not coming up. Is there any thing wrong with my config or setup? Can I have both T1s usins the same point code. I did it this way so that if 1 T1 goes down the second linkset and T1 stays up. [trunkgroups] [channels] context=in_dahdi switchtype=national usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes signalling = ss7 ss7type = ansi group=1 callgroup=1 pickupgroup=1 ss7_called_nai=dynamic ss7_calling_nai=dynamic ss7_internationalprefix = 00 ss7_nationalprefix = 0 ; All settings apply to linkset 1 linkset = 1 context=in_dahdi pointcode = 157 adjpointcode = 163 defaultdpc = 163 networkindicator=national cicbeginswith = 102 channel = 2-24 sigchan = 1 group = 2 linkset = 2 context=in_dahdi pointcode = 157 adjpointcode = 163 defaultdpc = 163 networkindicator=national cicbeginswith = 126 channel = 26-48 sigchan = 25 Thanks, Dave George Teletone Inc. 561 674 3838 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7 -- BIPIN RAGHUVANSHI OPERATION HEAD ASTERISK (DEVELOPMENT AND RESEARCH) WWW.EHORIZONS.IN 011-32323262 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100206/84481fa1/attachment-0001.htm
|