Here's a slightly modified example from my systems group=2 signalling=ss7 ss7type = ansi networkindicator = national cicbeginswith=73 adjpointcode = 005-000-032 pointcode = 005-000-033 defaultdpc = 005-000-032 linkset=1 slc=1 sigchan=96 echocancel=64 echocancelwhenbridged=yes echotraining=yes channel => 73-95 slc=2 sigchan=xx echocancel=64 echocancelwhenbridged=yes echotraining=yes channel => xx-xx Dave George wrote: > Where do I set slc=0 and slc=1? > > > Thanks, > Dave George > Teletone Inc. > 561 674 3838 > > > -----Original Message----- > From: asterisk-ss7-bounces at lists.digium.com > [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Paul Timmins > Sent: Friday, February 05, 2010 11:17 AM > To: asterisk-ss7 at lists.digium.com > Subject: Re: [asterisk-ss7] SS7 2 T1s >>> 2 linksets same point code > > You'll want to set up the same linkset, and use slc=0 and slc=1, the SLC > has to match what the remote end is using. This is of course assuming > you're connected using F links since the adjpointcode and defaultdpc are > the same as each other. > > Dave George wrote: > >> Hi, >> >> I am using two T1 for SS7 on the same box. Both T1s are using the same >> > point codes. I have each T1 setup as its own linkset (Linkset 1 and linkset > 2). > >> The second linkset is not coming up. >> >> Is there any thing wrong with my config or setup? Can I have both T1s >> > usins the same point code. I did it this way so that if 1 T1 goes down the > second linkset and T1 stays up. > >> [trunkgroups] >> [channels] >> >> context=in_dahdi >> >> switchtype=national >> >> usecallerid=yes >> callwaiting=yes >> usecallingpres=yes >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> canpark=yes >> cancallforward=yes >> callreturn=yes >> echocancel=yes >> echocancelwhenbridged=yes >> signalling = ss7 >> ss7type = ansi >> >> >> >> >> >> group=1 >> callgroup=1 >> pickupgroup=1 >> ss7_called_nai=dynamic >> ss7_calling_nai=dynamic >> ss7_internationalprefix = 00 >> ss7_nationalprefix = 0 >> >> ; All settings apply to linkset 1 >> linkset = 1 >> context=in_dahdi >> pointcode = 157 >> adjpointcode = 163 >> defaultdpc = 163 >> networkindicator=national >> cicbeginswith = 102 >> channel = 2-24 >> sigchan = 1 >> >> >> group = 2 >> linkset = 2 >> context=in_dahdi >> pointcode = 157 >> adjpointcode = 163 >> defaultdpc = 163 >> networkindicator=national >> cicbeginswith = 126 >> channel = 26-48 >> sigchan = 25 >> >> >> >> >> Thanks, >> Dave George >> Teletone Inc. >> 561 674 3838 >> >> >> >> >> >> > > >
|