Hi Sir,
my plan is on the asterisk use AS5400 as a SIP trunk.
E1(SS7) connected to AS5400 via E1 controller then AS5400 will talk to asterisk via SIP.
basically the requirement is, i can use AS5400 as a SIP trunk, without using PGW2200 (i think this is pricy stuff).
so if i have ss7 support on asterisk, can i already send/receive calls to/from the AS5400 with E1 SS7 without using PGW2200?
Regards,
Nhadie
--- On Fri, 6/27/08, Krzysztof Drewicz <krzysztofdrewicz at gmail.com> wrote:
From: Krzysztof Drewicz <krzysztofdrewicz@xxxxxxxxx>
Subject: Re: SS7 on AS5400
To: nhadie.ramos at yahoo.com, asterisk-ss7 at lists.digium.com
Date: Friday, June 27, 2008, 6:25 PM
2008/6/27 Nhadie Ramos <nhadie.ramos at yahoo.com>:
hi sir,
thanks for your reply. does that mean i need to buy E1 card? is it not possible to use it with AS5400? coz they already have it? or does chan_ss7 or libss7 need the E1 card? if E1 card is needed, and i bought 1, can i use that asterisk as a replacement for PGW2200 on handling? the SS7 signal?
The client has sth like this:
ss7 cloud = cisco AS5400 --- > where it goes here? what kind of connecion? ip? PRI?
ss7 cloud = cisco AS5400
so if U have a 4 links from Telco and you have a Cisco as talking the language of ss7, then you need something to connect this to Asterisk. If i don't get it wrong then you should use a SIP trunk or E1 card with DSS-1 (PRA/PRI) to connect to AS5400.
OR if the customer has a AS5400 but not using it, then you could use a Asterisk with 4 port card (or 4 asterisk boxes with 1 port/1card each one and do a redundant config) and use a Asterisk box to speek ss7 to telco.
Don't know what you try to accomplish.
--
Krzysztof Drewicz
+48 504 17 55 77
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080627/4153e9b5/attachment.htm
|