2008/6/27 Nhadie Ramos <nhadie.ramos at yahoo.com>: > hi sir, > > thanks for your reply. does that mean i need to buy E1 card? is it not > possible to use it with AS5400 coz they already have it? or does chan_ss7 > or libss7 need the E1 card? if E1 card is needed, and i bought 1, can i use > that asterisk as a replacement for PGW2200 on handling the SS7 signal? > The client has sth like this: ss7 cloud = cisco AS5400 --- > where it goes here? what kind of connecion? ip? PRI? ss7 cloud = cisco AS5400 so if U have a 4 links from Telco and you have a Cisco as talking the language of ss7, then you need something to connect this to Asterisk. If i don't get it wrong then you should use a SIP trunk or E1 card with DSS-1 (PRA/PRI) to connect to AS5400. OR if the customer has a AS5400 but not using it, then you could use a Asterisk with 4 port card (or 4 asterisk boxes with 1 port/1card each one and do a redundant config) and use a Asterisk box to speek ss7 to telco. Don't know what you try to accomplish. -- Krzysztof Drewicz +48 504 17 55 77 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080627/2b64a0bd/attachment.htm
|