Sorry, I should have been more explicit: linkset=1 pointcode=yourpointcode defaultdpc=yourdefaultdpc ; This is the "default route" for all ISUP messages ; Insert all the rest of your linkset options here, like network indicator, etc ; So here is sigchan 1 with adjacent point code = 1-1-1 adjpointcode=1-1-1 sigchan=23 ; Sigchan 2 has adjacent point code 1-1-2 adjpointcode=1-1-2 sigchan=24 ; Declare your channels as well cicbeginswith=1 channels=1-22 If this isn't clear, please contact me via IM and I'll help you get it setup correctly. Matthew Fredrickson ----- "Tom Chandler" <tchandle at eastex.net> wrote: > Mathew, > Following the comments below for two different points, libss7 will not > load > and in the /var/log/asterisk/messages file I get the message: > > Error[31611] chan_zap.c: Unspecified edfaultdpc! > > if I put it back with the sigchan like in the original zapata.conf it > > works. So it would > appear intermixing the sigchan in the adjpointcode selection does not > work. > > anyway.. > > Thanks > Tom Chandler > > ----- Original Message ----- > From: "Matthew Fredrickson" <creslin at digium.com> > To: <asterisk-ss7 at lists.digium.com> > Sent: Saturday, June 14, 2008 1:25 PM > Subject: Re: [asterisk-ss7] libss7 - stp point codes > > > > Tom Chandler wrote: > >> on going testing: Question: > >> > >> In an ANSI setup, I have two A-Links. One to each of the mated > STP's. > >> > >> in the zapata.conf, the adjpointcode (if I read it right) is for > the STP > >> point code. > >> I have a different point code for each STP. Can you or How would > you > >> load > >> both of these point codes into the configuration file. > > > > It's kind of a non intuitive interface for doing so, but this is how > it > > is done: > > > > adjpointcode=1-1-1 > > sigchan=24 ; or whatever the first link is > > adjpointcode=1-1-2 > > sigchan=48 ; or whatever the second link is > > > > -- > > Matthew Fredrickson > > Software/Firmware Engineer > > Digium, Inc. > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|