Anton: I was mistaken. At last test sig mtp2 did NOT work with Sangoma cards. The cards did work with sig = dchan. I'm going to delve further into this and identify why not. Apologies. -wasim On Thu, Jul 10, 2008 at 4:13 PM, Anton <anton.vazir at gmail.com> wrote: > Wasim, > > As I understand, mtp2 is hardwarely assisted sigchannel, > which functionality is implemented in DIGIUM cards to act > like dchan in PRI. I'd like just to confirm that we're > speaking about the same, and if so SANGOMA must have such a > support in their firmware too. As I know SANGOMA have > hardware assistance in their card for the own SS7 solution, > but will this work for Asterisk SS7 - is a question. > > On Thursday 10 July 2008 15:10, Wasim Baig wrote: > > 2008/7/10 Mark Wilkinson <mark.wilkinson at 2pmtech.com>: > > > Hi Anton, > > > I can only comment on it working with a Digium > > > TE410P card > > > > > > Sorry, I don't have any Sangoma cards. > > > > I can confirm it works with Sangoma cards as well as > > ofcourse, Digium cards. If you are using Sangoma cards, > > make sure you disable HW_TDM on the signalling channel. > -- wasim h. baig | principal consultant | convergence pk | +92 300 8508070 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080710/ff3aac61/attachment.htm
|