Hi Anton, I can only comment on it working with a Digium TE410P card Sorry, I don't have any Sangoma cards. Mark. Anton wrote: > Is it only with DIGIUM cards or it works so with SANGOMA > CARDS too? Anyone tried? > > On Thursday 10 July 2008 12:23, Mark Wilkinson wrote: > >> Hi Matthew, >> >> I've just tested the latest svn version with 'mtp2' >> instead of 'dchan' and my looped back linksets >> come up without any problems. >> >> Regards >> Mark Wilkinson. >> >> Matthew Fredrickson wrote: >> >>> TCB wrote: >>> >>>> I could not get C7 to get up with mtp2= on dahdi, >>>> works fine with the good ol' dchan. Feel free to try. >>>> >>> Just to let you guys know, I just fixed a bug that >>> another developer introduced into the mtp2 code in >>> DAHDI last night. If you update your DAHDI version to >>> something newere, it should work now. >>> >>> Matthew Fredrickson >>> >>> >>>> On Tue, Jul 8, 2008 at 9:03 AM, Mark Wilkinson >>>> >>>> <mark.wilkinson at 2pmtech.com> wrote: >>>> >>>>> Hello, >>>>> I'm looking for some help configuring a system to >>>>> test Asterisk's SS7 setup. >>>>> >>>>> I want to have one system setup with two linksets and >>>>> a T1 cross-over cable between 2 >>>>> ports on a TE410P (If this will work). >>>>> >>>>> At present, I have the following configured :- >>>>> >>>>> OS: CentOS 5 >>>>> LibPRI, LibSS7, Dahdi, Asterisk : All from svn trunk >>>>> >>>>> I'm pretty sure I have the dahdi config setup >>>>> correctly, as ports are shown as up and OK, but >>>>> I think I have a problem with the ss7 configuration >>>>> as the linksets remain down. >>>>> >>>>> Can anyone point me in the right direction or tell me >>>>> if it's even possible to set up Asterisk & SS7 >>>>> like this ? >>>>> >>>>> Thanks In Advance >>>>> Mark. >>>>> >>>>> Current config files are as follows :- >>>>> >>>>> /etc/dahdi/system.conf >>>>> oadzone=uk >>>>> defaultzone=uk >>>>> >>>>> span=1,1,0,ccs,hdb3 >>>>> bchan=1-15,17-31 >>>>> mtp2=16 >>>>> >>>>> span=2,0,0,ccs,hdb3 >>>>> bchan=32-46,48-62 >>>>> mtp2=47 >>>>> >>>>> >>>>> /etc/asterisk/chan_dahdi.conf >>>>> [trunkgroups] >>>>> >>>>> [channels] >>>>> switchtype=euroisdn >>>>> usecallerid=yes >>>>> callwaiting=yes >>>>> usecallingpres=yes >>>>> callwaitingcallerid=yes >>>>> threewaycalling=yes >>>>> transfer=yes >>>>> canpark=yes >>>>> cancallforward=yes >>>>> callreturn=yes >>>>> echocancel=yes >>>>> echocancelwhenbridged=yes >>>>> >>>>> group=1 >>>>> callgroup=1 >>>>> pickupgroup=1 >>>>> >>>>> >>>>> signalling = ss7 >>>>> ss7type = itu >>>>> >>>>> ss7_called_nai=dynamic >>>>> ss7_calling_nai=dynamic >>>>> >>>>> networkindicator=international >>>>> >>>>> ; port 1 >>>>> linkset = 1 >>>>> >>>>> group = 1 >>>>> signalling=ss7 >>>>> ss7type = itu >>>>> context = default >>>>> >>>>> pointcode = 2 >>>>> adjpointcode = 1 >>>>> defaultdpc = 1 >>>>> >>>>> networkindicator = international >>>>> >>>>> cicbeginswith = 1 >>>>> channel => 1-15 >>>>> cicbeginswith = 17 >>>>> channel => 17-31 >>>>> sigchan = 16 >>>>> >>>>> ; Port 2 >>>>> >>>>> linkset = 2 >>>>> group = 2 >>>>> signalling = ss7 >>>>> ss7type = itu >>>>> context = default >>>>> pointcode = 1 >>>>> adjpointcode = 2 >>>>> defaultdpc = 2 >>>>> networkindicator = international >>>>> cicbeginswith = 1 >>>>> channel = 31-46 >>>>> cicbeginswith = 17 >>>>> channel = 48-62 >>>>> sigchan = 47 >>>>> >>>>> >>>>> _______________________________________________ >>>>> --Bandwidth and Colocation Provided by >>>>> http://www.api-digital.com-- >>>>> >>>>> asterisk-ss7 mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> >>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>> >>> _______________________________________________ >>> --Bandwidth and Colocation Provided by >>> http://www.api-digital.com-- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>> > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080710/bb9867d9/attachment-0001.htm
|