Is it only with DIGIUM cards or it works so with SANGOMA CARDS too? Anyone tried? On Thursday 10 July 2008 12:23, Mark Wilkinson wrote: > Hi Matthew, > > I've just tested the latest svn version with 'mtp2' > instead of 'dchan' and my looped back linksets > come up without any problems. > > Regards > Mark Wilkinson. > > Matthew Fredrickson wrote: > > TCB wrote: > >> I could not get C7 to get up with mtp2= on dahdi, > >> works fine with the good ol' dchan. Feel free to try. > > > > Just to let you guys know, I just fixed a bug that > > another developer introduced into the mtp2 code in > > DAHDI last night. If you update your DAHDI version to > > something newere, it should work now. > > > > Matthew Fredrickson > > > >> On Tue, Jul 8, 2008 at 9:03 AM, Mark Wilkinson > >> > >> <mark.wilkinson at 2pmtech.com> wrote: > >>> Hello, > >>> I'm looking for some help configuring a system to > >>> test Asterisk's SS7 setup. > >>> > >>> I want to have one system setup with two linksets and > >>> a T1 cross-over cable between 2 > >>> ports on a TE410P (If this will work). > >>> > >>> At present, I have the following configured :- > >>> > >>> OS: CentOS 5 > >>> LibPRI, LibSS7, Dahdi, Asterisk : All from svn trunk > >>> > >>> I'm pretty sure I have the dahdi config setup > >>> correctly, as ports are shown as up and OK, but > >>> I think I have a problem with the ss7 configuration > >>> as the linksets remain down. > >>> > >>> Can anyone point me in the right direction or tell me > >>> if it's even possible to set up Asterisk & SS7 > >>> like this ? > >>> > >>> Thanks In Advance > >>> Mark. > >>> > >>> Current config files are as follows :- > >>> > >>> /etc/dahdi/system.conf > >>> oadzone=uk > >>> defaultzone=uk > >>> > >>> span=1,1,0,ccs,hdb3 > >>> bchan=1-15,17-31 > >>> mtp2=16 > >>> > >>> span=2,0,0,ccs,hdb3 > >>> bchan=32-46,48-62 > >>> mtp2=47 > >>> > >>> > >>> /etc/asterisk/chan_dahdi.conf > >>> [trunkgroups] > >>> > >>> [channels] > >>> switchtype=euroisdn > >>> usecallerid=yes > >>> callwaiting=yes > >>> usecallingpres=yes > >>> callwaitingcallerid=yes > >>> threewaycalling=yes > >>> transfer=yes > >>> canpark=yes > >>> cancallforward=yes > >>> callreturn=yes > >>> echocancel=yes > >>> echocancelwhenbridged=yes > >>> > >>> group=1 > >>> callgroup=1 > >>> pickupgroup=1 > >>> > >>> > >>> signalling = ss7 > >>> ss7type = itu > >>> > >>> ss7_called_nai=dynamic > >>> ss7_calling_nai=dynamic > >>> > >>> networkindicator=international > >>> > >>> ; port 1 > >>> linkset = 1 > >>> > >>> group = 1 > >>> signalling=ss7 > >>> ss7type = itu > >>> context = default > >>> > >>> pointcode = 2 > >>> adjpointcode = 1 > >>> defaultdpc = 1 > >>> > >>> networkindicator = international > >>> > >>> cicbeginswith = 1 > >>> channel => 1-15 > >>> cicbeginswith = 17 > >>> channel => 17-31 > >>> sigchan = 16 > >>> > >>> ; Port 2 > >>> > >>> linkset = 2 > >>> group = 2 > >>> signalling = ss7 > >>> ss7type = itu > >>> context = default > >>> pointcode = 1 > >>> adjpointcode = 2 > >>> defaultdpc = 2 > >>> networkindicator = international > >>> cicbeginswith = 1 > >>> channel = 31-46 > >>> cicbeginswith = 17 > >>> channel = 48-62 > >>> sigchan = 47 > >>> > >>> > >>> _______________________________________________ > >>> --Bandwidth and Colocation Provided by > >>> http://www.api-digital.com-- > >>> > >>> asterisk-ss7 mailing list > >>> To UNSUBSCRIBE or update options visit: > >>> > >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by > > http://www.api-digital.com-- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|