Magnus Kelly wrote: > Hello, Thanks for that - in order to also add a 2nd signalling link on the > 2nd E1 is it also as simple as just declaring a 2nd entry as in "sigchan = > 78, 47" or should this be a 2nd line? It should be on a separate line (though within the same linkset). I need to fix the syntax parser so that it can be on the same line though, thanks for reminding me... *puts on TODO list* Matthew Fredrickson > > > > -----Original Message----- > From: asterisk-ss7-bounces at lists.digium.com > [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Matthew > Fredrickson > Sent: 21 April 2008 16:49 > To: magnus.kelly at mapesbury.com; asterisk-ss7 at lists.digium.com > Subject: Re: [asterisk-ss7] Multi E1's in same linkset possible? > > Magnus Kelly wrote: >> Hello all, >> >> >> >> Could anyone share how to create a multiple E1 linkset to the same > upstream >> SS7 point-code msc. Currently the below config works for a single e1 on >> span 3 - but I would like to add a second e1 into the same linkset (on > span >> 2) Is this possible? If so, how does one configure the 2 nd E1? & what's > the >> relationship between the Digium card and the linksets and SLC for this. > > For adding another E1 as more bearer channels, it's as simple as adding > the additional channels in your linkset declaration. So below your > channels that you have already declared, append another "cicbeginswith" > line with your starting CIC for the first channel of the additional E1, > and then append your "channel" line with the additional channels. > > One nice thing about libss7 is that it doesn't care about your span > configuration below it. It only cares that you tell it which Zap/ > channels to use, and which CICs are mapped to the Zap channels and it's > happy. > > Matthew Fredrickson > >> Thanks >> >> Magnus >> >> >> >> Zaptel.conf >> >> # >> >> span=1,1,0,ccs,hdb3,crc4 >> >> bchan=1-15 >> >> dchan=16 >> >> bchan=17-31 >> >> # >> >> span=2,0,0,ccs,hdb3,crc4 >> >> bchan=32-46 >> >> dchan=47 >> >> bchan=48-62 >> >> # >> >> span=3,0,0,ccs,hdb3,crc4 >> >> bchan=63-77 >> >> dchan=78 >> >> bchan=79-93 >> >> # >> >> span=4,0,0,ccs,hdb3,crc4 >> >> bchan=94-108 >> >> dchan=109 >> >> bchan=110-124 >> >> # >> >> # Tone Zone Data >> >> loadzone=uk >> >> defaultzone=uk >> >> # >> >> ; >> >> ; SS& Zapata - LibSS7 - >> >> ; >> >> [trunkgroups] >> >> ; >> >> [channels] >> >> ; >> >> language=en >> >> context=msc-in >> >> signalling=ss7 >> >> callwaiting=yes >> >> usecallingpres=yes >> >> threewaycalling=yes >> >> transfer=yes >> >> canpark=yes >> >> cancallforward=yes >> >> callreturn=yes >> >> echocancel=yes >> >> echocancelwhenbridged=yes >> >> group=1 >> >> callgroup=1 >> >> pickupgroup=1 >> >> ; >> >> ss7type = itu >> >> ss7_called_nai=dynamic >> >> ss7_calling_nai=dynamic >> >> ; All settings apply to linkset 3 - relates to Zaptel.conf links and >> (linkset in msc is same as SLC) >> >> linkset = 3 >> >> pointcode = 1025 >> >> adjpointcode = 1024 >> >> defaultdpc = 1024 >> >> ; Begin CIC (Circuit indication codes) count with this number >> >> cicbeginswith = 65 >> >> channel = 63-77 >> >> cicbeginswith = 81 >> >> channel = 79-93 >> >> ; >> >> networkindicator=national_spare >> >> ; >> >> sigchan = 78 >> >> ; >> >> END. >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc.
|