Hello all, Could anyone share how to create a multiple E1 linkset to the same upstream SS7 point-code msc. Currently the below config works for a single e1 on span 3 - but I would like to add a second e1 into the same linkset (on span 2) Is this possible? If so, how does one configure the 2 nd E1? & what's the relationship between the Digium card and the linksets and SLC for this. Thanks Magnus Zaptel.conf # span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 # span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 # span=3,0,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 # span=4,0,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 # # Tone Zone Data loadzone=uk defaultzone=uk # ; ; SS& Zapata - LibSS7 - ; [trunkgroups] ; [channels] ; language=en context=msc-in signalling=ss7 callwaiting=yes usecallingpres=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 ; ss7type = itu ss7_called_nai=dynamic ss7_calling_nai=dynamic ; All settings apply to linkset 3 - relates to Zaptel.conf links and (linkset in msc is same as SLC) linkset = 3 pointcode = 1025 adjpointcode = 1024 defaultdpc = 1024 ; Begin CIC (Circuit indication codes) count with this number cicbeginswith = 65 channel = 63-77 cicbeginswith = 81 channel = 79-93 ; networkindicator=national_spare ; sigchan = 78 ; END. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080421/6906182f/attachment.htm
|