Hello everyone! Using chan_ss7 v0.9, I'm having a problem with getting the schannel to become aligned through an E1 SS7. The provider has given the following information: ss7type = itu signalling = ss7 linkset = 1 pointcode = 6157 (point code of your server) adjpointcode = 6758 (point code of our switch) Signaling E1 --- the 2nd timeslot is used for SLC 0. The CICs start at 2 on the 3rd timeslot. My ss7.conf looks like this: [linkset-siuc] enabled => yes enable_st => no use_connect => no hunting_policy => even_mru context => ss7 language => en t35 => 15000,timeout subservice => auto [link-l1] linkset => siuc channels => 3-30 schannel => 2 firstcic => 1 enabled => yes [link-l2] linkset => siuc channels => 1-31 schannel => firstcic => 32 enabled => no [link-l3] linkset => siuc channels => 1-31 schannel => firstcic => 63 enabled => no [link-l4] linkset => siuc channels => 1-31 schannel => firstcic => 94 enabled => no [host-asterisk1.local] if-1 => 172.16.xx.xx (edited on purpose) enabled => yes opc => 6157 dpc => siuc:6758 links => l1:1 and my Zaptel.conf looks like this: span=1,1,0,ccs,hdb3,crc4 bchan=2-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-62 span=3,0,0,ccs,hdb3,crc4 bchan=63-93 span=4,0,0,ccs,hdb3,crc4 bchan=94-124 # Global data loadzone = uk defaultzone = uk Zapata.conf is blank. However, I see this error on console: "timing source auto card 0!" As well as this: asterisk1*CLI> ss7 link status linkset siuc, link l1, schannel 2, NOT_ALIGNED, rx: 0, tx: 4/4, sentseq/lastack: 127/127, total 401920, 401952 Linkset: siuc> CIC 3 Idle Reset pending CIC 4 Idle Reset pending CIC 5 Idle Reset pending CIC 6 Idle Reset pending CIC 7 Idle Reset pending CIC 8 Idle Reset pending CIC 9 Idle Reset pending CIC 10 Idle Reset pending CIC 11 Idle Reset pending CIC 12 Idle Reset pending CIC 13 Idle Reset pending CIC 14 Idle Reset pending CIC 15 Idle Reset pending CIC 16 Idle Reset pending CIC 17 Idle Reset pending CIC 18 Idle Reset pending CIC 19 Idle Reset pending CIC 20 Idle Reset pending CIC 21 Idle Reset pending CIC 22 Idle Reset pending CIC 23 Idle Reset pending CIC 24 Idle Reset pending CIC 25 Idle Reset pending CIC 26 Idle Reset pending CIC 27 Idle Reset pending CIC 28 Idle Reset pending CIC 29 Idle Reset pending CIC 30 Idle Reset pending Does anyone have suggestions on how to get this to work properly or why it might not be connecting the schannel? Thank you!
![]() |