If it's a sangoma card, make sure you don't use the "hardware dchannel" feature. I think somebody else tried to set it up and it didn't behave properly with libss7 with that feature enabled. Their patch to zaptel didn't make it behave exactly like a true zaptel dchannel does, and so I believe it times out when polling for writablility. Of course (shameless plug) I recommend Digium cards. That's what I test and develop on. -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. ----- "pmaz" <pmaz at dmcs.pl> wrote: > >Hi > > > >I have isolated libss7 stack from asterisk. I just have mtp2, mtp3 > and isup > >running for libss7 with no external interfaces (ss7linktest > executable). > > > >I enabled libss7 with "ss7linktest itu XXX YYY" on one system and > >"ss7linktest itu YYY XXX" on other system. > > > >Rgds > >sai > > > Hello, > > > I'm having the same problem with two asterisk boxes connected via > sangoma a104d card. > Using latest asterisk from svn with integrated ss7 support. > Link just hangs in "PROVING" state.. after checking sources of libss7 > i found out, that (unless i'm mistaken of course) > some timeout function should be called when scheduled requests > timeouts, and i think it is never called so it may be > a timing problem. > > > > > > > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|