Hi, On this topic of signaling links versus bearer traffic. Is it possible to just use the Asterisk box to bring in the signaling, A-links only, and then via Asterisk MGCP control a media gateway like a Cisco 5400? That is, the SS7 information can be used with MGCP to control bearer traffic that is not actually terminating in the Asterisk box? Thanks, Michael Tague tague@xxxxxxxxxxxxxxxx 502-815-7171 ----- Original Message ----- From: "Matthew Fredrickson" <creslin@xxxxxxxxxx> To: <asterisk-ss7@xxxxxxxxxxxxxxxx> Sent: Tuesday, January 30, 2007 3:19 PM Subject: Re: Re: Turning up A-Links > > On Jan 30, 2007, at 9:08 AM, Joe Mays wrote: > > >> Well, in chan_ss7 you should be able to configure one E1 with only a > >> signalling link, and another as the bearer. But you do need at least > >> one > >> signalling link per chan_ss7 box. > > > > Does this imply that you cannot set a circuit up with only a > > signalling link in libSS7? > > Of course you can set up just a signalling link in libss7. But like > chan_ss7, you must have at least one signalling link per box w/ libss7. > > Matthew fredrickson > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 >
|