Dear All,
I have a problem during call setup. I am using asterisk with libss7
(trunk). It was working with my current configuration. Now it is not
working when I enabled the debugging I found that my box is sending REL
message instead of ACM as soon as an IAM message arrive.
The following message appears on the console when I try to place a call.
[Dec 16 22:59:42] NOTICE[30985]: chan_zap.c:9200 ss7_linkset: Received
RLC out and we haven't sent REL. Ignoring.
The following is the output of the debugging which shows that my box is
sending REL. I don't really know what is the reason for sending this
message.
My point code is 1085 and the other side point code is 2132
<[0] MSU
[ 8f 9e 21 ]
Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[ 85 ]
OPC 2132 DPC 1085 SLS 3
[ 3d 04 15 32 ]
CIC: 3
[ 03 00 ]
Message Type: IAM
[ 01 ]
--FIXED LENGTH PARMS[4]--
Nature of Connection Indicator:
Satellites in connection: 0
Continuity Check: Check not required (0)
Outgoing half echo control device: included (1)
[ 10 ]
Forward Call Indicators:
Nat/Intl Call Ind: call to be treated as a
national call (0)
End to End Method Ind: no end-to-end method(s)
available (0)
Interworking Ind: no interworking encountered
(0)
End to End Info Ind: no end-to-end information
available (0)
ISDN User Part Ind: ISDN user part used all the
way (1)
ISDN User Part Pref Ind: ISDN user part not
preferred all the way (1)
ISDN Access Ind: originating access non-ISDN (0)
SCCP Method Ind: no indication (0)
[ 60 00 ]
Calling Party Category:
Category: Ordinary calling subscriber (10)
[ 0a ]
Transmission Medium Requirements:
N x 64kbit/s unrestricted or possibly spare (3)
[ 03 ]
--VARIABLE LENGTH PARMS[1]--
Called Party Number:
Nature of address: 1
NI: 0
Numbering plan: 1
Address signals: 27558929#
[ 07 81 10 72 55 98 92 0f ]
--OPTIONAL PARMS--
Calling Party Number:
Nature of address: 3
NI: 0
Numbering plan: 1
Presentation: 0
Screening: 3
Address signals: 932336449
[ 0a 07 83 13 39 32 63 44 09 ]
Len = 16 [ 9e 90 0d 85 54 48 0f 31 03 00 0c 02 00 02 81 90 ]
FSN: 16 FIB 1
BSN: 30 BIB 1
>[0] MSU
[ 9e 90 0d ]
Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[ 85 ]
OPC 1085 DPC 2132 SLS 3
[ 54 48 0f 31 ]
CIC: 3
[ 03 00 ]
Message Type: REL
[ 0c ]
--VARIABLE LENGTH PARMS[1]--
Cause Indicator:
Coding Standard: 0
Location: 1
Cause Class: 1
Cause Subclass: 0
Cause: Normal call clearing (16)
[ 02 81 90 ]
Len = 12 [ 90 9f 09 85 3d 04 15 32 03 00 10 00 ]
FSN: 31 FIB 1
BSN: 16 BIB 1
<[0] MSU
[ 90 9f 09 ]
Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[ 85 ]
OPC 2132 DPC 1085 SLS 3
[ 3d 04 15 32 ]
CIC: 3
[ 03 00 ]
Message Type: RLC
[ 10 ]
Here is my zapata.conf:
[channels]
context=default
; Signaling type SS7
signalling = ss7
; Variant of SS7 signaling:
; Options are itu and ansi
ss7type = itu
; All settings apply to linkset 1
linkset = 1
; Point code of the linkset
pointcode = 1085
; Point code of node adjacent to this signaling link
; (Possibly the STP between you and your destination)
adjpointcode = 2132
; Default point code that you would like to assign to
; outgoing messages (in case of routing through STPs,
; or using A links)
defaultdpc = 2132
; What the MTP3 network indicator bits should be set to.
; Choices are national, national_spare, international,
; international_spare
networkindicator=national
; First signaling channel
sigchan = 1
; Begin CIC (Circuit indication codes) count with this number
cicbeginswith = 2
; Channels to associate with CICs on this linkset
channel = 2-31
; another cicbeginwith, so channel 16 is used for signalling
Here is My zaptel.conf :
# Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0"
span=1,1,0,ccs,hdb3
# termtype: te
bchan=2-31
dchan=1
# Global data
loadzone = us
defaultzone = us
Any help will be appreciated.
|