u have not defined CICs define CICs and check regards On Dec 10, 2007 4:01 AM, mark pieter <mark.pieter75 at gmail.com> wrote: > Hi all, > > I am new to libss7. I have downloaded the trunk versions for asterisk and > libss7 and successfully compiled and installed them on CentOS 5. > > The following is my zapata.conf file: > ------------------------------------------------------------------------------------------ > > [channels] > context=default > signalling = ss7 > ss7type = itu > linkset = 1 > pointcode = 1085 > adjpointcode = 2132 > defaultdpc = 2132 > networkindicator=national > sigchan = 1 > cicbeginswith = > channel = 2-31 > > ------------------------------------------------------------------------------------------ > > > The following is my zaptel.conf file : > ------------------------------------------------------------------------------------------ > > # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" > span=1,1,0,ccs,hdb3 > > bchan=2-31 > dchan=1 > > loadzone = us > defaultzone = us > ------------------------------------------------------------------------------------------ > > > > I verified the above mentioned configuration with my service provided more > than once and tested the link with another system (dialogic) with the same > settings and it is up and receiving calls > > Here is the output of: ss7 show linkset 1 > SS7 linkset 1 status: Down > > when I enabled debugging of ss7 I just see the following messages > displayed on the console: > > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > > > Is there anyway to know to increase the debugging level so I can see what > is going on behind the scenes ? > > Any help will be appreciated. > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20071210/8bc6ad31/attachment.htm
|