Hi all, I am new to libss7. I have downloaded the trunk versions for asterisk and libss7 and successfully compiled and installed them on CentOS 5. The following is my zapata.conf file: ------------------------------------------------------------------------------------------ [channels] context=default signalling = ss7 ss7type = itu linkset = 1 pointcode = 1085 adjpointcode = 2132 defaultdpc = 2132 networkindicator=national sigchan = 1 cicbeginswith = channel = 2-31 ------------------------------------------------------------------------------------------ The following is my zaptel.conf file : ------------------------------------------------------------------------------------------ # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" span=1,1,0,ccs,hdb3 bchan=2-31 dchan=1 loadzone = us defaultzone = us ------------------------------------------------------------------------------------------ I verified the above mentioned configuration with my service provided more than once and tested the link with another system (dialogic) with the same settings and it is up and receiving calls Here is the output of: ss7 show linkset 1 SS7 linkset 1 status: Down when I enabled debugging of ss7 I just see the following messages displayed on the console: Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Is there anyway to know to increase the debugging level so I can see what is going on behind the scenes ? Any help will be appreciated. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20071210/0820b675/attachment.htm
|