And why appear these errors, could be problem with the HDLC function in zaptel that can't process too much message ? Using the libss7, I have seen too much Bad FSC, and HDLC abort messsages, and I trying to understand, why and how can I solve it. The thing is, I'm 99% the telco is not sending messages with these errors, because if this is so, then, other subsystems connected to it will have ss7 link errors as well and this is not the case. I have replaced TE410P boards, cable, E1 port in the telco side and nothing different. Then, this is somewhere in the zaptel ? ---------- Forwarded message ---------- From: Matthew Fredrickson <creslin@xxxxxxxxxx> Date: Nov 7, 2006 11:51 AM Subject: Re: libss7 link quality troubles To: asterisk-ss7@xxxxxxxxxxxxxxxx Yes, though a fully featured MTP2 layer is written to work around any such layer 1 problems. Matthew Fredrickson On Nov 7, 2006, at 3:14 AM, Tomasz Paszkowski wrote: > On Mon, Nov 06, 2006 at 04:36:15PM -0400, Robert Kenton wrote: >> Matt, >> What would be if we have a lot of Bad FCS or Abort HDLC ? It >> means that >> the message sent by the Telco are discarded ? > > yes > > -- > Tomasz Paszkowski > Systems engineer > DCG Dominas Consulting Group Sp. z o.o. > http://www.dcg.pl > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
|