Yeah, I have a script called reasterisk: #!/bin/bash export PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin asterisk -r -x "stop when convenient" rmmod wct4xxp rmmod zaptel modprobe wct4xxp ztcfg -v nice --1 open -c 10 -- asterisk -vc It takes care of everything. I got chan_ss7 working ok, but with frequent CRC/frame too short errors. I'm using a Version 9 TDM405P, I can't ship it back to USA as it's in production for the other 2 spans. Marcelo > On Nov 5, 2006, at 9:04 PM, Marcelo Pacheco wrote: >> Most IAM and RLC result in: >> [Nov 6 00:59:10] DEBUG[21678]: chan_zap.c:8460 ss7_linkset: Overrun >> detected! >> >> >> >> Using dchan instead of hardhdlc results in constant CRC, frame too >> short >> errors on the ss7 link. >> >> >> Is the current trunk bad ? I noticed core set verbose and core set >> debug >> isn't working properly. >> >> Any sugestions ? > > I have noticed similar problems related to hardhdlc and ss7 links. I > think the problem has to do with the fact that running an SS7 link is a > lot more intensive than running a normal PRI, so it may not have > adequate performance in that mode to handle that type of link. > However, you shouldn't have any trouble (other than an occasional HDLC > blip) with running it in dchan mode. If you are, maybe one of your > sigchans is running in the old mode. Did you re-run ztcfg and/or > reload the driver before you retested? > > Matthew Fredrickson > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- Atenciosamente Marcelo Pacheco Diretor de Tecnologia e Sistemas - FaleVOIP Telecom Com: (27)2127-9791 Cel: (27)9945-3993 Fax: (27)2127-9799 E-mail: marcelo@xxxxxxxxxxxx MSN: marcelo@xxxxxxxxxxxx / marcelo@xxxxxxxxxxx Site: www.falevoip.net
|