AutoPC patch for chan_ss7 0.9.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
     iam getting this error can anyone let me know about this please
 mtp.c:1313 mtp2_read_su: MTP2 CRC error (CRC=0xb4cc != 0xf0b8) on link
'l1'.
regards
surender


On 05/12/06, Mr.Surender Reddy <gvsurenderreddy@xxxxxxxxx> wrote:
>
> Thank you it works fine for me great job infact thank you again
> regards
> surender
>
>
>  On 05/12/06, Mr.Surender Reddy <gvsurenderreddy@xxxxxxxxx> wrote:
> >
> > Dear ,
> >                thank you for the new patch which is very useful i will
> > give that a try today.
> >
> > regards
> > surender
> >
> >
> >  On 04/12/06, Anton <anton.vazir@xxxxxxxxx > wrote:
> > >
> > > Hi Jacub!
> > >
> > > Thanks for the patch! It's usefull!
> > >
> > > I've a littile question, will the patch work with different
> > > opc's? on different linksets? I mean If I'm connected with
> > > 2x telcos and for both of them I should have different opc?
> > > If no, seems you understand chan_ss7 internals quite good,
> > > maybe you will not find it very difficult to add such a
> > > functionality?
> > >
> > > Regards,
> > > Anton.
> > >
> > > On 5 December 2006 00:32, Jakub Klausa wrote:
> > > > Hello,
> > > >
> > > >       here's another patch we, at ss7.pl wrote for chan_ss7
> > > > 0.9.
> > > >
> > > >       AutoPC, or Auto Point Code patch, gives you the ability
> > > > to ommit the opc/dpc configuration entirely, and refain
> > > > the point code addresses from the link (if it's
> > > > configured right at the other end - as an exercise, try
> > > > to link asterisks with AutoPC on on both ends of a link
> > > > ;)).
> > > >
> > > >       All you need to do, is to add:
> > > >
> > > >       [19:57:04] [70] manhattan:jacke:~> tail ss7.conf
> > > >
> > > >       [host-manhattan]
> > > >       enabled => yes
> > > >       autopc => yes
> > > >       ;opc => 0x1111
> > > >       ;dpc => test:0x2222
> > > >       links => l1:1,l2:2
> > > >
> > > >       The 'autopc => yes' directive allows you not to specify
> > > > any opc and dcp parameters. If you include them, they're
> > > > ignored anyway.
> > > >
> > > >       After starting asterisk, you'll get something like this:
> > > >
> > > >       [chan_ss7.so] => (SS7 Protocol Support)
> > > >       [...]
> > > >       Dec  4 19:16:13 NOTICE[26879]: config.c:860 load_config:
> > > > Configuring DPC 0 for linkset 'test'. [...]
> > > >               -- SS7 channel loaded successfully.
> > > >       Dec  4 19:16:23 WARNING[26902]: mtp.c:822
> > > > timeout_sltm_t1: No SLTA received within Q.707 timer T1,
> > > > trying again on link 'l1'. Dec  4 19:16:23 NOTICE[26901]:
> > > > mtp.c:1195 mtp2_good_frame: autopc = 1 Dec  4 19:16:23
> > > > WARNING[26902]: chan_ss7.c:651 monitor_main: MTP is now
> > > > UP on link 'l1'. Dec  4 19:16:23 WARNING[26902]:
> > > > chan_ss7.c:661 monitor_main: MTP is now INSERVICE for
> > > > linkset 'test'. *CLI> ss7 show links
> > > >       Number of linksets: 1.
> > > >       Linkset 1 name is: test.
> > > >               Number of links in linkset: 2.
> > > >               Link number 1 name is: l1
> > > >               Link number 2 name is: l2
> > > >               Config opc=0x1111, dpc=0x2222
> > > >
> > > >       The warning is fine, as understandably we have to sit
> > > > silet and wait for the other side to send us something,
> > > > so we can guess the point codes.
> > > >
> > > >       As you see - the command 'ss7 show links' will show you
> > > > the opc and dpc parameters being used.
> > > >
> > > >       The patch can be found at:
> > > >
> > > >       http://www.ss7.pl/~jacke/patches/chan_ss7/chan_ss7-0.9.p
> > > >atch-2.gz
> > > >
> > > >       (in the combined form, with the previous chan_ss7 0.9
> > > > patch by ss7.pl)
> > > >
> > > >       If you have any questions - drop me a note.
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com<http://easynews.com/>--
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20061213/faa7f7f3/attachment.htm

[Index of Archives]     [Asterisk App Development]     [PJ SIP]     [Gnu Gatekeeper]     [IETF Sipping]     [Info Cyrus]     [ALSA User]     [Fedora Linux Users]     [Linux SCTP]     [DCCP]     [Gimp]     [Yosemite Backpacking]     [Deep Creek Hot Springs]     [Yosemite Campsites]     [ISDN Cause Codes]     [Asterisk Books]

  Powered by Linux