For the moment I can't. I don't have the server here and port 1 is in use for the moment. Thomas -----Original Message----- From: ADEGOKE ARUNA [mailto:goksie@xxxxxxxxx] Sent: 20 April 2006 17:09 To: Deillon Thomas-WTD008 Subject: RE: NOT_ALIGNED I think that can help if the schan is coming from the first span. Goksie -----Original Message----- From: Deillon Thomas-WTD008 [mailto:WTD008@xxxxxxxxxxxx] Sent: Thursday, April 20, 2006 5:07 PM To: ADEGOKE ARUNA Subject: RE: NOT_ALIGNED I didn't think that could change something. Do you ? Thomas -----Original Message----- From: ADEGOKE ARUNA [mailto:goksie@xxxxxxxxx] Sent: 20 April 2006 17:04 To: Deillon Thomas-WTD008 Subject: RE: NOT_ALIGNED Why can't you make the first two span as the E1 and put T1 on the 3rd span Goksie -----Original Message----- From: Deillon Thomas-WTD008 [mailto:WTD008@xxxxxxxxxxxx] Sent: Thursday, April 20, 2006 5:00 PM To: ADEGOKE ARUNA Subject: RE: NOT_ALIGNED You are right, my first span is a T1 (1-24 = 25 chan) But the 3 others are E1 (25-55 = 31 chan) (56-86 = 31 chan) Thomas -----Original Message----- From: ADEGOKE ARUNA [mailto:goksie@xxxxxxxxx] Sent: 20 April 2006 16:46 To: Deillon Thomas-WTD008 Subject: RE: NOT_ALIGNED If u are talking about E1.. I think your bchan should be 1-31, Here is my zaptel.conf for 4 port sangoma card. loadzone = uk defaultzone=uk span = 1,0,0,ccs,hdb3 bchan = 1-31 span = 2,0,0,ccs,hdb3 bchan = 32-62 span = 3,0,0,ccs,hdb3 bchan = 63-93 span = 4,0,0,ccs,hdb3 bchan = 94-124 Goksie -----Original Message----- From: Deillon Thomas-WTD008 [mailto:WTD008@xxxxxxxxxxxx] Sent: Thursday, April 20, 2006 2:11 PM To: ADEGOKE ARUNA Subject: RE: NOT_ALIGNED I have just this on my zaptel.conf span=2,1,0,ccs,hdb3 bchan=25-55 span=3,0,0,ccs,hdb3 bchan=56-86 loadzone=uk defaultzone=uk I have no dchan . Thomas -----Original Message----- From: ADEGOKE ARUNA [mailto:goksie@xxxxxxxxx] Sent: 20 April 2006 14:06 To: Deillon Thomas-WTD008 Subject: FW: NOT_ALIGNED Can you disable the dchan on the zaptel driver.. Cos that one solved my problem with alighment. Goksie -----Original Message----- From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx [mailto:asterisk-ss7-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Deillon Thomas-WTD008 Sent: Thursday, April 20, 2006 1:35 PM To: asterisk-ss7@xxxxxxxxxxxxxxxx Subject: RE: NOT_ALIGNED Sorry, I make a mistake, it's a E1 card, not a T1 Thomas -----Original Message----- From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx [mailto:asterisk-ss7-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Tomasz Paszkowski Sent: 20 April 2006 12:02 To: asterisk-ss7@xxxxxxxxxxxxxxxx Subject: Re: NOT_ALIGNED On Thu, Apr 20, 2006 at 11:40:21AM +0100, Deillon Thomas-WTD008 wrote: > I have one card and I make a link between port 2 and port 3 with a T1 > cable: AFAIR chan_ss7 will not run on T1 links (ANSI). Currently only E1 (ITU) links are supported. -- Tomasz Paszkowski Systems engineer DCG Dominas Consulting Group Sp. z o.o. http://www.dcg.pl _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
|