Hello, I have every minute a message like this on my CLI: Apr 20 07:56:58 WARNING[26868]: mtp.c:393 t2_timeout: MTP2 timer T2 timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial alignment failed on link 'l2' I found some information on the archive, but I didn't find the solution. Tks for your help, Thomas -----Original Message----- From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx [mailto:asterisk-ss7-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Tomasz Paszkowski Sent: 20 April 2006 12:02 To: asterisk-ss7@xxxxxxxxxxxxxxxx Subject: Re: NOT_ALIGNED On Thu, Apr 20, 2006 at 11:40:21AM +0100, Deillon Thomas-WTD008 wrote: > I have one card and I make a link between port 2 and port 3 with a T1 > cable: AFAIR chan_ss7 will not run on T1 links (ANSI). Currently only E1 (ITU) links are supported. -- Tomasz Paszkowski Systems engineer DCG Dominas Consulting Group Sp. z o.o. http://www.dcg.pl
![]() |