Re: Using ARI to set callerid for an outdial using pjsip?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Good luck with Asterisk version higher than 13.

Check out issues that I have created a long time ago:

https://issues.asterisk.org/jira/browse/ASTERISK-26868 ARI: Asterisk crash -
frame copy into invalid memory during bridging operations (Asterisk 13 and
14)
- I was able to make workaround for non-early bridging, check last post

https://issues.asterisk.org/jira/browse/ASTERISK-26718 ARI: Bridge
destroying doesn't work as expected (Asterisk 14)
- not a big problem but still :(

https://issues.asterisk.org/jira/browse/ASTERISK-27067 ARI: Memory leak in
Asterisk 14
- huge problem

I'm using Asterisk 13 instead. Early bridging is great and I wanted to use
it, but Asterisk was crashing was too often, every few thousands calls.

Best regards,
Marin

> -----Original Message-----
> From: asterisk-app-dev-bounces@xxxxxxxxxxxxxxxx [mailto:asterisk-app-dev-
> bounces@xxxxxxxxxxxxxxxx] On Behalf Of Richard Frith-Macdonald
> Sent: Friday, September 15, 2017 2:10 PM
> To: Asterisk Application Development discussion
> Subject: Re:  Using ARI to set callerid for an outdial
using
> pjsip?
> 
> 
> > On 15 Sep 2017, at 12:19, Phil Mickelson <phil@xxxxxxxxxxxxxxx> wrote:
> >
> > If you look at the Channel option
> (https://wiki.asterisk.org/wiki/display/AST/Asterisk+15+Channels+REST+API
> #Asterisk15ChannelsRESTAPI-create) you see the originateWithId POST
> option.  I believe that's what you want.  And then you specify the caller
id
> you want to use in the callerId query parameter.  It works like a champ.
I can
> change this easily for what ever customer I'm making the call for.
> >
> > Hope this helps.  If not, let me know and I'll try again.
> 
> Thanks. I'm using Asterisk 14.6 rather than 15 at the moment, but I don't
> think there should be a difference (I guess I need to carefully read the
new
> features in 15 though),
> 
> I'm trying to use the /channels/create  command rather than the /channels
> command, because I want to be able to bridge the call before the dial-out.
> 
> I'll try using /channels instead (if it works it would at least prove that
the
> problem is not in the endpoint configuration), but in the long run I thing
I
> need to be able to do the job using /channels/create
> _______________________________________________
> asterisk-app-dev mailing list
> asterisk-app-dev@xxxxxxxxxxxxxxxx
> http://lists.digium.com/cgi-bin/mailman/listinfo/asterisk-app-dev


_______________________________________________
asterisk-app-dev mailing list
asterisk-app-dev@xxxxxxxxxxxxxxxx
http://lists.digium.com/cgi-bin/mailman/listinfo/asterisk-app-dev



[Index of Archives]     [Asterisk SS7]     [Asterisk Announcements]     [Asterisk Users]     [PJ SIP]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Linux API]

  Powered by Linux