2015-02-25 23:58 GMT+01:00 Aaron Caffrey <wifiextender@xxxxxxxxxxxxx>:
> Install udisks, udisks2.
> Create /etc/polkit-1/rules.d/10-enable-mount.rules
>
> polkit.addRule(function(action, subject) {
> if (action.id == "org.freedesktop.udisks2.filesystem-mount-system"
> && subject.isInGroup("storage")) {
> return polkit.Result.YES;
> }
> });
I did follow your advice and did create this config file.
I have installed udisks and udisks2.
I can follow these steps:
http://archlinuxarm.org/platforms/armv6/raspberry-pi
to the step 4. where the following command:
mkfs.ext4 /dev/sdX2
can't be completed successfully, because after I run it, I can't mount
the new second partition formatted to have ext4 type filesystem.
I tried these steps by using Gparted too, but at this step Gparted
can't read partitions from the during read on
/dev/mmcblk0
Gparted gives the error message:
I/O error during read on /dev/mmcblk0
What can I do to solve this problem?
--
Regards from Pal
