On 2010-08-19 23:12, Victor Lowther wrote:
On Aug 19, 2010 10:08 AM, "Kurt J. Bosch"<kjb-temp-2009@xxxxxxxxxxxxx>
wrote:
On 2010-08-19 10:19, Jan de Groot wrote:
On Thu, 2010-08-19 at 00:56 -0400, Dave Reisner wrote:
Couldn't we avoid all this by just flipping a switch in the kernel?
CONFIG_RTC_DRV_CMOS=y
If it's compiled into the kernel, udev picks it up and creates
the /dev
nodes for us.
Which still locks out the people who use a custom kernel with this
driver compiled as module. IMHO the init scripts should work with both
module and built-in.
So why not let udev do the job? Patch below. I modified my initcpio to
get rid of the devtmpfs. A ls -l /dev/rtc* added between the new
/sbin/udevadm settle and the initial clock setting showed /dev/rtc0 and
/dev/rtc -> rtc0. So I think this should work.
I did *not* move the sysinit_udevlaunched hook together with udev start
to avoid insane creation times of dev nodes because this hook is used
for some early udev triggering in fbsplash-extras (AUR).
Patch against bashification-redux:
From 22d410a2566964d58752d443a1312a6eb552660a Mon Sep 17 00:00:00 2001
From: Kurt J. Bosch<kjb-temp-2009@xxxxxxxxxxxxx>
Date: Thu, 19 Aug 2010 16:46:23 +0200
Subject: [PATCH 17/17] Correct rtc dev nodes creation using udev
---
rc.sysinit | 22 +++++++---------------
1 files changed, 7 insertions(+), 15 deletions(-)
diff --git a/rc.sysinit b/rc.sysinit
index 4421def..2415967 100755
--- a/rc.sysinit
+++ b/rc.sysinit
@@ -46,6 +46,12 @@ else
/bin/dmesg -n 3
fi
+echo> /proc/sys/kernel/hotplug
+
+stat_busy "Starting UDev Daemon"
+/sbin/udevd --daemon
+stat_done
+
HWCLOCK_PARAMS="--hctosys"
case $HARDWARECLOCK in
UTC) HWCLOCK_PARAMS+=" --utc";;
@@ -56,15 +62,7 @@ esac
if [[ $HWCLOCK_PARAMS ]]; then
# enable rtc access
/sbin/modprobe -q -a rtc-cmos rtc genrtc
- # If devtmpfs is used, the required RTC device already exists now
- # Otherwise, create whatever device is available
- if ! [[ -c /dev/rtc || -c /dev/rtc0 ]]; then
- for dev in /sys/class/rtc/rtc0/dev /sys/class/misc/rtc/dev; do
- [[ -e $dev ]] || continue
- IFS=: read -r major minor< "$dev"
- /bin/mknod /dev/rtc c $major $minor
- done
- fi
+ /sbin/udevadm settle
# Do a clock set here for a few reasons:
# 1. Make creation time on udev nodes sane (FS#8665)
@@ -79,12 +77,6 @@ if [[ $HWCLOCK_PARAMS ]]; then
fi
fi
-echo> /proc/sys/kernel/hotplug
-
-stat_busy "Starting UDev Daemon"
-/sbin/udevd --daemon
-stat_done
-
run_hook sysinit_udevlaunched
# Trigger udev uevents
--
1.7.2.1
> I like this one the best.
>
> Sent from my Nexus One. Sorry for top posting.
>
Corrected
Hmm, the patch might break things with custom non modular kernels
without devtmpfs though. No modules loading no uevents and no dev nodes.
On the other hand reading the hwclock man page, I'm a bit uncertain
whether that piece will ever use /dev/rtc0 without a symlink from
/dev/rtc. Instead it might actually fall back to direct I/O with the
current code and with the patched one too.
Moreover I found a couple of interesting things:
* The system clock is already set (by the kernel - in spite of
CONFIG_RTC_HCTOSYS not set) even without doing anything. Weird, but with
UTC hardware clock I even get correct mtimes in early user space.
* man hwclock:
> −−systz
> Reset the System Time based on the current timezone.
> ...
> This is an alternate option to −−hctosys that does not read the
> hardware clock, and may be used in system startup scripts for recent
> 2.6 kernels where you know the System Time contains the Hardware
> Clock time.
I switched my hardware clock to localtime, reverted my patch and
modified rc.sysinit to use −systz instead of --hctosys for the first
hwclock call and also disabled the entire rtc modprobe and mknod code. A
date command inserted for testing spit out the correct time.
From the util-linux-ng list:
> Indeed, we may be running hwclock --systz before /dev is mounted.
Getting rid of the pre fsck hwclock --hctosys would also on the average
save another half second of boot up time beside removing some ugly code.
AFAIKS we can go one of three ways:
* Use udev expecting CONFIG_RTC_DRV_CMOS=m or fall back to direct I/O
* Use −−systz, drop the ugly code and expect some help from the kernel
* Use an even more ugly code creating the missing symlink:
Corrected non udev patch against bashification-redux:
From 4e5d6a763af8f45c63ad53aa99b82246f90c0b43 Mon Sep 17 00:00:00 2001
From: Kurt J. Bosch <kjb-temp-2009@xxxxxxxxxxxxx>
Date: Fri, 20 Aug 2010 09:04:46 +0200
Subject: [PATCH 17/17] Really correct rtc dev nodes creation
---
rc.sysinit | 15 +++++++++------
1 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/rc.sysinit b/rc.sysinit
index 4421def..1ff37cc 100755
--- a/rc.sysinit
+++ b/rc.sysinit
@@ -58,12 +58,15 @@ if [[ $HWCLOCK_PARAMS ]]; then
/sbin/modprobe -q -a rtc-cmos rtc genrtc
# If devtmpfs is used, the required RTC device already exists now
# Otherwise, create whatever device is available
- if ! [[ -c /dev/rtc || -c /dev/rtc0 ]]; then
- for dev in /sys/class/rtc/rtc0/dev /sys/class/misc/rtc/dev; do
- [[ -e $dev ]] || continue
- IFS=: read -r major minor < "$dev"
- /bin/mknod /dev/rtc c $major $minor
- done
+ if ! [[ -c /dev/rtc ]]; then
+ for dev in /sys/class/misc/rtc /sys/class/rtc/rtc0; do
+ [[ -e $dev/dev ]] || continue
+ IFS=: read -r major minor < "$dev/dev"
+ node=${dev##*/}
+ /bin/mknod /dev/$node c $major $minor
+ [[ $node = rtc ]] || /bin/ln -s $node /dev/rtc
+ break
+ done
fi
# Do a clock set here for a few reasons:
--
1.7.2.1
--
Kurt
