Re: [PATCH 28/48] Use bash-style conditionals when setting up the hardware clock.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I like this one the best.

Sent from my Nexus One. Sorry for top posting.

On Aug 19, 2010 10:08 AM, "Kurt J. Bosch" <kjb-temp-2009@xxxxxxxxxxxxx>
wrote:
> Am 2010-08-19 10:19, schrieb Jan de Groot:
>> On Thu, 2010-08-19 at 00:56 -0400, Dave Reisner wrote:
>>> Couldn't we avoid all this by just flipping a switch in the kernel?
>>>
>>> CONFIG_RTC_DRV_CMOS=y
>>>
>>> If it's compiled into the kernel, udev picks it up and creates
>>> the /dev
>>> nodes for us.
>>
>> Which still locks out the people who use a custom kernel with this
>> driver compiled as module. IMHO the init scripts should work with both
>> module and built-in.
>>
>
> So why not let udev do the job? Patch below. I modified my initcpio to
> get rid of the devtmpfs. A ls -l /dev/rtc* added between the new
> /sbin/udevadm settle and the initial clock setting showed /dev/rtc0 and
> /dev/rtc -> rtc0. So I think this should work.
>
> I did *not* move the sysinit_udevlaunched hook together with udev start
> to avoid insane creation times of dev nodes because this hook is used
> for some early udev triggering in fbsplash-extras (AUR).
>
> Patch against bashification-redux:
>
> From 22d410a2566964d58752d443a1312a6eb552660a Mon Sep 17 00:00:00 2001
> From: Kurt J. Bosch <kjb-temp-2009@xxxxxxxxxxxxx>
> Date: Thu, 19 Aug 2010 16:46:23 +0200
> Subject: [PATCH 17/17] Correct rtc dev nodes creation using udev
>
> ---
> rc.sysinit | 22 +++++++---------------
> 1 files changed, 7 insertions(+), 15 deletions(-)
>
> diff --git a/rc.sysinit b/rc.sysinit
> index 4421def..2415967 100755
> --- a/rc.sysinit
> +++ b/rc.sysinit
> @@ -46,6 +46,12 @@ else
> /bin/dmesg -n 3
> fi
>
> +echo > /proc/sys/kernel/hotplug
> +
> +stat_busy "Starting UDev Daemon"
> +/sbin/udevd --daemon
> +stat_done
> +
> HWCLOCK_PARAMS="--hctosys"
> case $HARDWARECLOCK in
> UTC) HWCLOCK_PARAMS+=" --utc";;
> @@ -56,15 +62,7 @@ esac
> if [[ $HWCLOCK_PARAMS ]]; then
> # enable rtc access
> /sbin/modprobe -q -a rtc-cmos rtc genrtc
> - # If devtmpfs is used, the required RTC device already exists now
> - # Otherwise, create whatever device is available
> - if ! [[ -c /dev/rtc || -c /dev/rtc0 ]]; then
> - for dev in /sys/class/rtc/rtc0/dev /sys/class/misc/rtc/dev; do
> - [[ -e $dev ]] || continue
> - IFS=: read -r major minor < "$dev"
> - /bin/mknod /dev/rtc c $major $minor
> - done
> - fi
> + /sbin/udevadm settle
>
> # Do a clock set here for a few reasons:
> # 1. Make creation time on udev nodes sane (FS#8665)
> @@ -79,12 +77,6 @@ if [[ $HWCLOCK_PARAMS ]]; then
> fi
> fi
>
> -echo > /proc/sys/kernel/hotplug
> -
> -stat_busy "Starting UDev Daemon"
> -/sbin/udevd --daemon
> -stat_done
> -
> run_hook sysinit_udevlaunched
>
> # Trigger udev uevents
> --
> 1.7.2.1
>
>


[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux