> > Rob, > > Thanks for your quick response. I checked and I do not have a directory > /var/log/httpd. In var/log I do have lots of log files - adduser, > auth.log, cron, dmesg.today, ftp.log, lastlog, maillog, > messages,mount.today, ppp.log, sendmail, setuid.today, slip.log, userlog > and wtmp. I displayed several of these and the only one, which looked > like it contained something you might want to see is messages. > Following is the last portion of that file. Again thanks in advance for > any suggestions you can give. On your system, your apache log files are in: /usr/local/web/logs/... Your Adminweb logs are in: /usr/local/adminweb/logs/... The file: /var/log/messages may also hold relevant log messages, especially about startup or Apache failures, if it is a code crash. ////jerry > > Jul 12 07:15:30 scnc /kernel: sio1: type 16550A > Jul 12 07:15:30 scnc /kernel: ppc0: <Parallel port> at port 0x378-0x37f > irq 7 on > isa0 > Jul 12 07:15:30 scnc /kernel: ppc0: SMC-like chipset > (ECP/EPP/PS2/NIBBLE) in COM > PATIBLE mode > Jul 12 07:15:30 scnc /kernel: ppc0: FIFO with 16/16/8 bytes threshold > Jul 12 07:15:30 scnc /kernel: lpt0: <Printer> on ppbus0 > Jul 12 07:15:30 scnc /kernel: lpt0: Interrupt-driven port > Jul 12 07:15:30 scnc /kernel: Waiting 10 seconds for SCSI devices to > settle > Jul 12 07:15:30 scnc /kernel: sa0 at ahc1 bus 0 target 6 lun 0 > Jul 12 07:15:30 scnc /kernel: sa0: <ARCHIVE Python 04106-XXX 7350> > Removable Seq > uential Access SCSI-2 device > Jul 12 07:15:30 scnc /kernel: sa0: 10.000MB/s transfers (10.000MHz, > offset 15) > Jul 12 07:15:30 scnc /kernel: pass2 at ahc0 bus 0 target 6 lun 0 > Jul 12 07:15:30 scnc /kernel: pass2: <DELL 1x6 U2W SCSI BP 5.23> Fixed > Processor > SCSI-2 device > Jul 12 07:15:30 scnc /kernel: pass2: 3.300MB/s transfers > Jul 12 07:15:30 scnc /kernel: da1 at ahc0 bus 0 target 1 lun 0 > Jul 12 07:15:30 scnc /kernel: da1: <QUANTUM ATLAS10K3_18_SCA 120G> Fixed > Direct > Access SCSI-3 device > Jul 12 07:15:30 scnc /kernel: da1: 80.000MB/s transfers (40.000MHz, > offset 127, > 16bit), Tagged Queueing Enabled > Jul 12 07:15:30 scnc /kernel: da1: 17366MB (35566478 512 byte sectors: > 255H 63S/ > T 2213C) > Jul 12 07:15:30 scnc /kernel: da0 at ahc0 bus 0 target 0 lun 0 > Jul 12 07:15:30 scnc /kernel: da0: <SEAGATE ST336607LC 0007> Fixed > Direct Access > SCSI-3 device > Jul 12 07:15:30 scnc /kernel: da0: 80.000MB/s transfers (40.000MHz, > offset 63, 1 > 6bit), Tagged Queueing Enabled > Jul 12 07:15:30 scnc /kernel: da0: 35003MB (71687372 512 byte sectors: > 255H 63S/ > T 4462C) > Jul 12 07:15:30 scnc /kernel: Mounting root from ufs:/dev/da0s1a > Jul 12 07:15:30 scnc /kernel: cd0 at ahc1 bus 0 target 5 lun 0 > Jul 12 07:15:30 scnc /kernel: cd0: <NEC CD-ROM DRIVE:466 1.06> Removable > CD-ROM > SCSI-2 device > Jul 12 07:15:30 scnc /kernel: cd0: 20.000MB/s transfers (20.000MHz, > offset 15) > Jul 12 07:15:30 scnc /kernel: cd0: Attempt to query device size failed: > NOT READ > Y, Medium not present > Jul 12 07:15:30 scnc /kernel: ipfw2 initialized, divert disabled, > rule-based for > warding enabled, default to deny, logging disabled > Jul 12 07:15:30 scnc ntpd[91]: ntpd 4.1.0-a Wed Dec 17 10:53:32 EST 2003 > (1) > Jul 12 07:15:30 scnc ntpd[91]: kernel time discipline status 2040 > Jul 12 07:18:14 scnc su: jgraves to Rlisd on /dev/ttyp0 > Jul 12 07:20:05 scnc ntpd[91]: time set 0.904476 s > Jul 12 07:25:33 scnc sm-mta[183]: k6CBPXsx000183: Losing > ./qfk6CBPXsx000183: sav > email panic > Jul 12 07:25:33 scnc sm-mta[183]: k6CBPXsx000183: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 07:30:49 scnc sm-mta[221]: k6CBUnsx000221: Losing > ./qfk6CBUnsx000221: sav > email panic > Jul 12 07:30:49 scnc sm-mta[221]: k6CBUnsx000221: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 07:36:05 scnc sm-mta[263]: k6CBa4sx000263: Losing > ./qfk6CBa4sx000263: sav > email panic > Jul 12 07:36:05 scnc sm-mta[263]: k6CBa4sx000263: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 07:41:20 scnc sm-mta[299]: k6CBfKsx000299: Losing > ./qfk6CBfKsx000299: sav > email panic > Jul 12 07:41:20 scnc sm-mta[299]: k6CBfKsx000299: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 07:46:36 scnc sm-mta[326]: k6CBkasx000326: Losing > ./qfk6CBkasx000326: sav > email panic > Jul 12 07:46:36 scnc sm-mta[326]: k6CBkasx000326: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 07:51:51 scnc sm-mta[365]: k6CBppsx000365: Losing > ./qfk6CBppsx000365: sav > email panic > Jul 12 07:51:51 scnc sm-mta[365]: k6CBppsx000365: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 07:58:27 scnc sm-mta[399]: k6CBwRsx000399: Losing > ./qfk6CBwRsx000399: sav > email panic > Jul 12 07:58:27 scnc sm-mta[399]: k6CBwRsx000399: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 08:00:07 scnc ntpd[91]: time reset 0.630934 s > Jul 12 08:09:43 scnc sm-mta[462]: k6CC9hsx000462: Losing > ./qfk6CC9hsx000462: sav > email panic > Jul 12 08:09:43 scnc sm-mta[462]: k6CC9hsx000462: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 08:20:59 scnc sm-mta[532]: k6CCKxsx000532: Losing > ./qfk6CCKxsx000532: sav > email panic > Jul 12 08:20:59 scnc sm-mta[532]: k6CCKxsx000532: SYSERR(root): > savemail: cannot > save rejected email anywhere > Jul 12 08:21:01 scnc named[692]: starting > (/usr/local/named/db/named.conf). nam > ed 8.3.6-REL-p1 Wed Dec 17 10:53:43 EST 2003 > Rark@xxxxxxxxxxxxxxxxxxx:/work/o > bj/usr/src/usr.sbin/named > Jul 12 08:21:01 scnc named[692]: limit files set to fdlimit (1024) > Jul 12 08:21:01 scnc named[692]: dynamic zone file '207.190.164.rdnsdb' > is writa > ble > Jul 12 08:21:01 scnc named[692]: dynamic zone file '10.20.32.rdnsdb' is > writable > Jul 12 08:21:01 scnc named[692]: dynamic zone file > 'BlissfieldArtsCenter.org.dns > db' is writable > Jul 12 08:21:01 scnc named[692]: dynamic zone file > 'blissfield.k12.mi.us.dnsdb' > is writable > Jul 12 08:21:01 scnc named[692]: /usr/local/named/db/named.conf:35: > cannot redef > ine zone '164.190.207.in-addr.arpa' class IN > Jul 12 08:21:01 scnc named[692]: dynamic zone file 'bourdette.com.dnsdb' > is writ > able > Jul 12 08:21:01 scnc named[692]: dynamic zone file > 'erinhufford.com.dnsdb' is wr > itable > Jul 12 08:21:01 scnc named[692]: dynamic zone file 'kchufford.com.dnsdb' > is writ > able > Jul 12 08:21:01 scnc named[692]: dynamic zone file > 'underscorewebdesign.com.dnsd > b' is writable > Jul 12 08:21:01 scnc named[693]: Ready to answer queries. > Jul 12 08:21:02 scnc /kernel: pid 733 (openssl), uid 0: exited on signal > 10 (cor > e dumped) > Jul 12 08:21:03 scnc apcupsd[762]: apcupsd FATAL ERROR in apcconfig.c at > line 83 > 3 Error opening configuration file > (/usr/local/etc/apcupsd/apcupsd.conf): No suc > h file or directory > Jul 12 08:21:04 scnc apcupsd[762]: apcupsd error shutdown completed > Jul 12 08:21:26 scnc squid[916]: Squid Parent: child process 918 started > Jul 12 08:28:24 scnc sm-mta[1026]: k6CCS3sx001026: Losing > ./qfk6CCS3sx001026: sa > vemail panic > Jul 12 08:28:24 scnc sm-mta[1026]: k6CCS3sx001026: SYSERR(root): > savemail: canno > t save rejected email anywhere > > > > Jan Graves > Network Administrator/Engineer > Lenawee Intermediate School District > 4107 N. Adrian Highway > Adrian, MI 49221 > Phone: 517-265-1634 > Fax: 517-265-7405 > Visit us on the web at http://lisd.k12.mi.us > > -----Original Message----- > From: Rob Wilkerson [mailto:r.d.wilkerson@xxxxxxxxx] > Sent: Wednesday, July 12, 2006 7:27 AM > To: users@xxxxxxxxxxxxxxxx > Subject: Re: [users@httpd] Starting Apache > > See if you have more logs in /var/log/httpd. Those may provide > additional information if they exist. > > On 7/12/06, Graves, Jan <Jan.Graves@xxxxxxx> wrote: > > Some of you will probably recognize this problem from last week. We > have been having major email problems and I have not been able to send > or receive mail most days. So, I hope this message gets sent. > > > > I am running Apache Version 1.3 on a Unix system. Things were running > fine until storms took out the power over the July 4th week-end and the > system needed to be re-started. This system was set up by a third party > company who no longer provides support. So, I am trying to determine > what the problem is. The Unix system itself starts and all of the > processes that I expect, except Apache. > > > > Once the system is up and I look at my running processes I see the > following: > > > > ps -a > > PID TT STAT TIME COMMAND > > 144 p0 Is 0:00.03 login [pam] (login) > > 145 p0 I 0:00.03 -tcsh (tcsh) > > 149 p0 I 0:00.05 lynx > > 151 p0 I 0:00.00 sh -c > /usr/local/web/internal-documents/bin/shell.sh > > 152 p0 I 0:00.00 sh -c > /usr/local/web/internal-documents/bin/shell.sh > > 155 p0 I 0:00.02 /usr/local/bin/tcsh > > 159 p0 S 0:00.10 _su (csh) > > 279 p0 R+ 0:00.00 ps -a > > 8 con Is+ 0:00.08 sh /etc/rc autoboot > > 219 con I+ 0:00.05 sendmail: ./k6CB79kE000219 > localhost.blissfield.k12.m > > > > I see no indication that Apache is running. If I go to > usr/local/etc/rc.d and type apache.sh start and press enter, then > display my processes, I see the same thing. I do not receive any kind > of error telling me that Apache cannot start. > > > > The httpd.conf file shows ErrorLog /usr/local/web/logs/error_log > > So, I looked at that file and this is the end of it: > > > > [Fri Jul 7 14:08:33 2006] [error] mod_ssl: Init: Private key not > found (OpenSSL > > library error follows) > > [Fri Jul 7 14:08:33 2006] [error] OpenSSL: error:0D07207B:asn1 > encoding routine > > s:ASN1_get_object:header too long > > [Mon Jul 10 11:21:36 2006] [error] mod_ssl: Init: Private key not > found (OpenSSL > > library error follows) > > [Mon Jul 10 11:21:36 2006] [error] OpenSSL: error:0D07207B:asn1 > encoding routine > > s:ASN1_get_object:header too long > > [Wed Jul 12 07:05:11 2006] [error] mod_ssl: Init: Private key not > found (OpenSSL > > library error follows) > > [Wed Jul 12 07:05:11 2006] [error] OpenSSL: error:0D07207B:asn1 > encoding routine > > s:ASN1_get_object:header too long > > [Wed Jul 12 07:26:21 2006] [error] mod_ssl: Init: Private key not > found (OpenSSL > > library error follows) > > [Wed Jul 12 07:26:21 2006] [error] OpenSSL: error:0D07207B:asn1 > encoding routine > > s:ASN1_get_object:header too long > > > > > > Thanks in advance for any suggestions on how to resolve this problem. > > > > > > Jan Graves > > Network Administrator/Engineer > > Lenawee Intermediate School District > > 4107 N. Adrian Highway > > Adrian, MI 49221 > > Phone: 517-265-1634 > > Fax: 517-265-7405 > > Visit us on the web at http://lisd.k12.mi.us > > > > --------------------------------------------------------------------- > > The official User-To-User support forum of the Apache HTTP Server > Project. > > See <URL:http://httpd.apache.org/userslist.html> for more info. > > To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx > > " from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx > > For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx > > > > > > > -- > > Rob Wilkerson > > --------------------------------------------------------------------- > The official User-To-User support forum of the Apache HTTP Server > Project. > See <URL:http://httpd.apache.org/userslist.html> for more info. > To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx > " from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx > > > --------------------------------------------------------------------- > The official User-To-User support forum of the Apache HTTP Server Project. > See <URL:http://httpd.apache.org/userslist.html> for more info. > To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx > " from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx > > > --------------------------------------------------------------------- The official User-To-User support forum of the Apache HTTP Server Project. See <URL:http://httpd.apache.org/userslist.html> for more info. To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx " from the digest: users-digest-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
|