on the options.. ok. But I have no clue if they're the right options, as I'm looking over numerous sites, and copious testing -- trial/error to understand. there is no php involved, and the apache error log data I pasted appears to be the relevant data On Thu, Jul 11, 2024 at 2:50 PM Frank Gingras <thumbs@xxxxxxxxxx> wrote: > > > > On Thu, Jul 11, 2024 at 2:41 PM bruce <badouglas@xxxxxxxxx> wrote: >> >> Hi Frank! >> >> Again, thanks for all your replies... Hopefully, I'll eventually have >> the "light" turn on! >> >> Here's updated information >> -updated berat,conf -- for the virthost/config >> -output from the -- /var/logs/apache/error.log >> -output from the --- apachectl -S >> and the display from the browser/url >> >> cat /etc/apache2/sites-available/berat.conf >> <VirtualHost *:80> >> ServerAdmin foo@xxxxxxxxx >> ServerName temp22 >> ServerAlias temp >> >> DocumentRoot /var/www/html/berat >> >> ProxyPass / http://127.0.0.1:3000/ >> >> ProxyPassReverse / http://127.0.0.1:3000/ >> >> >> <Directory /var/www/html/berat> >> >> Options +FollowSymLinks >> >> AllowOverride All >> Options -MultiViews >> >> Require all granted >> ##Options -Indexes +FollowSymLinks +MultiViews >> AllowOverride All Require all granted >> >> >> </Directory> >> >> LogLevel debug >> ErrorLog ${APACHE_LOG_DIR}/error.log >> CustomLog ${APACHE_LOG_DIR}/access.log combined >> </VirtualHost> >> >> \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ >> apachectl -S >> AH00558: apache2: Could not reliably determine the server's fully >> qualified domain name, using 10.10.0.9. Set the 'ServerName' directive >> globally to suppress this message >> VirtualHost configuration: >> *:80 is a NameVirtualHost >> default server temp22 >> (/etc/apache2/sites-enabled/berat.conf:1) <<<<<<<<<<<<<<<<<<<< >> port 80 namevhost temp22 >> (/etc/apache2/sites-enabled/berat.conf:1) <<<<<<<<<<<<<<<<<<<< >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/dolibarr.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/domainmod.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/drougnov.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/filgeary.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/flatpress.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/freescout.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/glozzome.conf:1) >> alias temp >> port 80 namevhost temp22 >> (/etc/apache2/sites-enabled/invoiceninja.conf:1) >> alias temp >> port 80 namevhost temp22 >> (/etc/apache2/sites-enabled/invoiceplane.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/larap.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/mantisbt.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/matomo.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/minthcm.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/petronius.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/priyansh.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/sendportal.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/snipe.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/uideck.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/userlp.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/wave.conf:1) >> alias temp >> port 80 namevhost temp22 (/etc/apache2/sites-enabled/zentaopms.conf:1) >> alias temp >> ServerRoot: "/etc/apache2" >> Main DocumentRoot: "/var/www/html" >> Main ErrorLog: "/var/log/apache2/error.log" >> Mutex default: dir="/var/run/apache2/" mechanism=default >> Mutex mpm-accept: using_defaults >> Mutex watchdog-callback: using_defaults >> Mutex rewrite-map: using_defaults >> Mutex proxy: using_defaults >> PidFile: "/var/run/apache2/apache2.pid" >> Define: DUMP_VHOSTS >> Define: DUMP_RUN_CFG >> User: name="www-data" id=33 >> Group: name="www-data" id=33 >> ////////////////////////////////////////////////////////////////////// >> >> more /var/logs/apache2/error.log >> [Thu Jul 11 18:34:26.962982 2024] [proxy:debug] [pid 75271] >> proxy_util.c(2154): AH00925: initializing worker >> http://127.0.0.1:3000/ shared >> [Thu Jul 11 18:34:26.963057 2024] [proxy:debug] [pid 75271] >> proxy_util.c(2214): AH00927: initializing worker >> http://127.0.0.1:3000/ local >> [Thu Jul 11 18:34:26.963128 2024] [proxy:debug] [pid 75271] >> proxy_util.c(2262): AH00931: initialized single connection worker in >> child 75271 for (127.0.0.1:3000) >> [Thu Jul 11 18:34:36.463332 2024] [authz_core:debug] [pid 75267] >> mod_authz_core.c(843): [client 162.234.196.167:60276] AH01628: >> authorization result: granted (no directives) >> [Thu Jul 11 18:34:36.463485 2024] [proxy:debug] [pid 75267] >> mod_proxy.c(1521): [client 162.234.196.167:60276] AH01143: Running >> scheme http handler (attempt 0) >> [Thu Jul 11 18:34:36.463499 2024] [proxy:debug] [pid 75267] >> proxy_util.c(2576): AH00942: http: has acquired connection for >> (127.0.0.1:3000) >> [Thu Jul 11 18:34:36.463530 2024] [proxy:debug] [pid 75267] >> proxy_util.c(2641): [client 162.234.196.167:60276] AH00944: connecting >> http://127.0.0.1:3000/berat to 127.0.0.1:3000 >> [Thu Jul 11 18:34:36.463645 2024] [proxy:debug] [pid 75267] >> proxy_util.c(2864): [client 162.234.196.167:60276] AH00947: connected >> /berat to 127.0.0.1:3000 >> [Thu Jul 11 18:34:36.464155 2024] [proxy:debug] [pid 75267] >> proxy_util.c(3336): AH02824: http: connection established with >> 127.0.0.1:3000 (127.0.0.1:3000) >> [Thu Jul 11 18:34:36.464203 2024] [proxy:debug] [pid 75267] >> proxy_util.c(3525): AH00962: http: connection complete to >> 127.0.0.1:3000 (127.0.0.1) >> [Thu Jul 11 18:34:36.466804 2024] [proxy:debug] [pid 75267] >> proxy_util.c(2592): AH00943: http: has released connection for >> (127.0.0.1:3000) >> >> >> >> when accessing the server, running the PM2 server, and using curl.. >> >> curl http://127.0.0.1:3001 >> this generates the data/content.. which should (hopefully) >> be returned/displayed in the browser >> >> but for now.. >> http://161.35.5.174/berat >> >> gets --->> "Internal Server Error" >> >> >> On Thu, Jul 11, 2024 at 1:06 PM Frank Gingras <thumbs@xxxxxxxxxx> wrote: >> > >> > >> > >> > On Thu, Jul 11, 2024 at 12:43 PM bruce <badouglas@xxxxxxxxx> wrote: >> >> >> >> updated typo.. >> >> >> >> weird thing now.. based on the current/listed apache conf file... >> >> i get the"Internal Server Error" page now.. >> >> >> >> On Thu, Jul 11, 2024 at 12:39 PM bruce <badouglas@xxxxxxxxx> wrote: >> >> > >> >> > Hi Frank, >> >> > >> >> > Thanks for the reply. >> >> > >> >> > I'm still going through suggestions, as well as information from other >> >> > sites. I'm still confused, and think I might be making things worse. >> >> > >> >> > Not sure if this is accepted as a question, but if you have >> >> > apache/proxy skills, are you up for making a few $$! >> >> > >> >> > I'm thinking this is reasonably simple, but I'm missing something. >> >> > >> >> > The test server has multiple test apps, running off subfolders >> >> > /var/www/html/test1 >> >> > /var/www/html/test2 >> >> > /var/www/html/berat >> >> > >> >> > Right now, for the test "berat" app, the changes I made are generating >> >> > an internal 500 server error. >> >> > >> >> > The test url -- http://161.35.5.174/berat >> >> > >> >> > Thanks for your pointers/insight! >> >> > >> >> > weird thing now.. based on the current/listed apache conf file... >> >> > i get the base "ubuntu/apache" default page now.. >> >> > --the "berat" is trimed... >> >> > >> >> > ========================================================= >> >> > cat /etc/apache2/sites-available/berat.conf >> >> > <VirtualHost *:80> >> >> > ServerAdmin foo@xxxxxxxxx >> >> > ServerName temp22 >> >> > ServerAlias temp >> >> > >> >> > DocumentRoot /var/www/html/berat >> >> > >> >> > ProxyPass / http://127.0.0.1:3000/ >> >> > >> >> > ProxyPassReverse / http://127.0.0.1:3000/ >> >> > >> >> > >> >> > #DocumentRoot /var/www/html/berat >> >> > >> >> > >> >> > <Directory /var/www/html/berat> >> >> > >> >> > #ProxyRequests Off >> >> > #ProxyPreserveHost On >> >> > #<Proxy *> >> >> > # Require all granted >> >> > #</Proxy> >> >> > >> >> > #ProxyPass / http://127.0.0.1:3000/ >> >> > >> >> > #ProxyPassReverse / http://127.0.0.1:3000/ >> >> > >> >> > # DirectoryIndex index.html index.php >> >> > >> >> > # Options -Indexes +FollowSymLinks +MultiViews >> >> > Options +FollowSymLinks >> >> > >> >> > AllowOverride All >> >> > Options -MultiViews >> >> > Order allow,deny >> >> > Allow from all >> >> > >> >> > #Require all granted >> >> > ##Options -Indexes +FollowSymLinks +MultiViews >> >> > AllowOverride All Require all granted >> >> > >> >> > >> >> > ##Options Indexes FollowSymLinks MultiViews >> >> > ##Options -Indexes FollowSymlinks >> >> > #Options FollowSymlinks >> >> > #AllowOverride All >> >> > ##Order allow,deny >> >> > ##allow from all >> >> > #Require all granted >> >> > </Directory> >> >> > >> >> > ##Alias "/berat" "/var/www/html/berat/" >> >> > >> >> > >> >> > LogLevel debug >> >> > ErrorLog ${APACHE_LOG_DIR}/error.log >> >> > CustomLog ${APACHE_LOG_DIR}/access.log combined >> >> > </VirtualHost> >> >> > >> >> > On Thu, Jul 11, 2024 at 9:40 AM Frank Gingras <thumbs@xxxxxxxxxx> wrote: >> >> > > >> >> > > >> >> > > >> >> > > On Thu, Jul 11, 2024 at 8:02 AM Marc <Marc@xxxxxxxxxxxxxxxxx> wrote: >> >> > >> >> >> > >> I am testing a bit with this: >> >> > >> >> >> > >> 32 <Location /xxxx> >> >> > >> 33 # files are still loaded from default host >> >> > >> 34 Define defaulthost "bbbb" >> >> > >> 35 Define proxyhost "cccc" >> >> > >> 36 >> >> > >> 37 ProxyPreserveHost Off >> >> > >> 38 ProxyAddHeaders On >> >> > >> 39 SetOutputFilter proxy-html >> >> > >> 40 ProxyHTMLEnable On >> >> > >> 41 ProxyHTMLExtended On >> >> > >> 42 >> >> > >> 43 ProxyPass "https://${proxyhost}/aaaa" >> >> > >> 44 ProxyPassReverse "https://${proxyhost}/aaaa" >> >> > >> 45 >> >> > >> 46 ProxyPassReverseCookieDomain "${proxyhost}" "${defaulthost}" >> >> > >> 47 ProxyPassReverseCookiePath "/" "/xxxx/" >> >> > >> 48 >> >> > >> 49 Header edit Set-Cookie ^(.*)$ $1;HttpOnly;Secure;SameSite=None >> >> > >> 50 >> >> > >> 51 ProxyHTMLURLMap https://${proxyhost}/aaaa https://${defaulthost}/xxxx >> >> > >> 52 >> >> > >> 53 Options +ExecCGI +FollowSymLinks -MultiViews >> >> > >> 54 </Location> >> >> > >> >> >> > >> > -----Original Message----- >> >> > >> > From: bruce <badouglas@xxxxxxxxx> >> >> > >> > Sent: Thursday, 11 July 2024 13:20 >> >> > >> > To: users@xxxxxxxxxxxxxxxx >> >> > >> > Subject: reverse proxy setup >> >> > >> > >> >> > >> > Hi. >> >> > >> > >> >> > >> > Testing a github app that appears to use/require reverse proxy to >> >> > >> > display results on the browser. >> >> > >> > >> >> > >> > The basic app uses npm/nextjs to generate content, Per different >> >> > >> > sites, the process uses PM2 to run the process, and to be able to show >> >> > >> > the content via an internal/local "server". This is accessed via -- >> >> > >> > http://127.0.0.1:3000. >> >> > >> > >> >> > >> > Using curl on the local/test server, content can be accessed via the site >> >> > >> > curl http://127.0.0.1:3000. >> >> > >> > >> >> > >> > My issue now, is how to create the Apache conf to be able to have the >> >> > >> > user at http://1.2.3.4/berat, be able to display the content. This >> >> > >> > requires somehow setting up the reverse proxy process, in the VirtHost >> >> > >> > of the config file. The test site is being run from a subdir >> >> > >> > /var/www/html/berat <<< >> >> > >> > >> >> > >> > Researching/testing hasn't had the light go off yet! >> >> > >> > >> >> > >> > Here's what I've got, but it's not correct. >> >> > >> > >> >> > >> > Pointers would be useful. (and possible explanation!) >> >> > >> > >> >> > >> > cat /etc/apache2/sites-available/berat.conf >> >> > >> > <VirtualHost *:80> >> >> > >> > ServerAdmin foo@xxxxxxxxx >> >> > >> > ServerName temp22 >> >> > >> > ServerAlias temp >> >> > >> > >> >> > >> > DocumentRoot /var/www/html/berat >> >> > >> > >> >> > >> > ProxyRequests Off >> >> > >> > ProxyPreserveHost On >> >> > >> > <Proxy *> >> >> > >> > Require all granted >> >> > >> > </Proxy> >> >> > >> > >> >> > >> > ProxyPreserveHost On >> >> > >> > >> >> > >> > <Location "/berat"> >> >> > >> > ProxyPreserveHost Off >> >> > >> > ProxyErrorOverride Off >> >> > >> > </Location> >> >> > >> > >> >> > >> > #ProxyPass /api/system-a/ >> >> > >> > https://external-domain.example2.org/system-a/ >> >> > >> > >> >> > >> > ProxyPass /berat http://127.0.0.1:3000/ >> >> > >> > >> >> > >> > ProxyPassReverse /berat http://127.0.0.1:3000/ >> >> > >> > >> >> > >> > >> >> > >> > #DocumentRoot /var/www/html/berat >> >> > >> > >> >> > >> > >> >> > >> > <Directory /var/www/html/berat> >> >> > >> > >> >> > >> > #ProxyRequests Off >> >> > >> > #ProxyPreserveHost On >> >> > >> > #<Proxy *> >> >> > >> > # Require all granted >> >> > >> > #</Proxy> >> >> > >> > >> >> > >> > #ProxyPass / http://127.0.0.1:3000/ >> >> > >> > >> >> > >> > #ProxyPassReverse / http://127.0.0.1:3000/ >> >> > >> > >> >> > >> > # DirectoryIndex index.html index.php >> >> > >> > >> >> > >> > # Options -Indexes +FollowSymLinks +MultiViews >> >> > >> > Options +FollowSymLinks >> >> > >> > >> >> > >> > AllowOverride All >> >> > >> > Require all granted >> >> > >> > ##Options -Indexes +FollowSymLinks +MultiViews >> >> > >> > AllowOverride All Require all granted >> >> > >> > >> >> > >> > >> >> > >> > ##Options Indexes FollowSymLinks MultiViews >> >> > >> > ##Options -Indexes FollowSymlinks >> >> > >> > #Options FollowSymlinks >> >> > >> > #AllowOverride All >> >> > >> > ##Order allow,deny >> >> > >> > ##allow from all >> >> > >> > #Require all granted >> >> > >> > </Directory> >> >> > >> > >> >> > >> > ##Alias "/berat" "/var/www/html/berat/" >> >> > >> > >> >> > >> > >> >> > >> > LogLevel debug >> >> > >> > ErrorLog ${APACHE_LOG_DIR}/error.log >> >> > >> > CustomLog ${APACHE_LOG_DIR}/access.log combined >> >> > >> > </VirtualHost> >> >> > >> > >> >> > >> > --------------------------------------------------------------------- >> >> > >> > To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx >> >> > >> > For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx >> >> > >> >> >> > > >> >> > > A couple points here: >> >> > > >> >> > > 1) Avoid proxying from <Location> blocks, unless you have a good reason to >> >> > > 2) Always match the trailing slashes when proxying or redirecting, i.e. /foo -> /foo and /foo/ -> /foo/ >> >> > > 3) <Proxy *> is for forward proxies, so remove that >> >> >> >> --------------------------------------------------------------------- >> >> To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx >> >> For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx >> >> >> > >> > This is not really a proper venue to solicit consulting services; asking your questions and posting the answers will suffice. >> > >> > I see that you're also using 2.2 authz directives now (Allow / Order) - you should be using Require under 2.4 instead. >> > >> > You should post the output from apachectl -S as well, as it looks like you have misconfigured vhosts. >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx >> For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx >> > > Another problem: do not specify more than one Options directive in the same context, merge the two. > > As for the error, find the error log entry, and if php is involved, check the php error logs. --------------------------------------------------------------------- To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx