Re: Help - 2.2 to 2.4 migration onto new server failing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Can you run httpd from the command line instead of as a service?

- Y

On Tue, May 12, 2015 at 2:25 PM, Jim Walls <jim@xxxxxxxxx> wrote:
Binaries downloaded from:
http://www.apachelounge.com/download/
Version 2.4 12 Windows 64 bit version (yes, I am running a 64 bit computer and OS.
 
There is nothing at all in the Apache log except the original install log entry.  I assume because the service never starts.
 
IIS is NOT running - one of the first things I checked after installing windows.  I will NEVER run IIS and make sure it's dead right away.  Checked again and it's did not resurrect itself from the dead.
 
Jim
 
 

From: "Yehuda Katz" <yehuda@xxxxxxxxxx>
Sent: Tuesday, May 12, 2015 10:08 AM
To: "users@xxxxxxxxxxxxxxxx" <users@xxxxxxxxxxxxxxxx>, jim@xxxxxxxxx
Subject: Re: Help - 2.2 to 2.4 migration onto new server failing
 
Which distribution are you using (a.k.a. where did you download from)?
 
Is there anything in the apache error log?
 
The first thing that comes to mind is make sure IIS is not running.
 
- Y
 
On Tue, May 12, 2015 at 12:55 PM, Jim Walls <jim@xxxxxxxxx> wrote:
Help!  I have been running Apache 2.2 for quite a few years on an old Windows 2000 Server that recently died.  I have a new Windows 2012 R2 server and trying to get Apache loaded on the new server.  It seemed like a good opportunity to upgrade from 2.2 to 2.4 in the process so that is what I installed on the new server.  I went through the config file and changed the few things that I caught that had to be changed, but the Apache service wont even start.  If I go into services and manually start it, I get an error message that says the service could not be started and gives a very generic error message that says to look in the Windows System event log for details.  When I look in the Windows System event log, all is says is that the service shut down due to an invalid function.  Finally renamed config files so that it had the default  "It works" configuration, and get the same problem.
 
Anyone have an brilliant ideas?
 
Jim
 
 
 


[Index of Archives]     [Open SSH Users]     [Linux ACPI]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Squid]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux