[PATCH 1/2] drm/amd/display: Do not set drr on pipe commit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wesley Chalmers <Wesley.Chalmers@xxxxxxx>

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.

This change expects that Freesync requests are blocked when
optimized_required is true.

Fixes: de1da2f7fe25 ("drm/amd/display: Add monitor specific edid quirk")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 6 ++++++
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 7 +++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 4492bc2392b6..dba7eab9a2c4 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2123,6 +2123,12 @@ void dcn20_optimize_bandwidth(
 	if (hubbub->funcs->program_compbuf_size)
 		hubbub->funcs->program_compbuf_size(hubbub, context->bw_ctx.bw.dcn.compbuf_size_kb, true);
 
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) {
+		dc_dmub_srv_p_state_delegate(dc,
+			true, context);
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
+	}
+
 	dc->clk_mgr->funcs->update_clocks(
 			dc->clk_mgr,
 			context,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index bf8864bc8a99..7d38977f09a6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -951,11 +951,18 @@ void dcn30_set_disp_pattern_generator(const struct dc *dc,
 void dcn30_prepare_bandwidth(struct dc *dc,
 			     struct dc_state *context)
 {
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) {
+		dc->optimized_required = true;
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = false;
+	}
+
 	if (dc->clk_mgr->dc_mode_softmax_enabled)
 		if (dc->clk_mgr->clks.dramclk_khz <= dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000 &&
 				context->bw_ctx.bw.dcn.clk.dramclk_khz > dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000)
 			dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz);
 
 	dcn20_prepare_bandwidth(dc, context);
+
+	dc_dmub_srv_p_state_delegate(dc, false, context);
 }
 
-- 
2.41.0




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux