On 6/9/2023 12:08 PM, Kenneth Feng wrote:
On smu 13.0.0, the compute workload type cannot be set on all the skus
due to some other problems. This workaround is to make sure compute workload type
can also run on some specific skus.
v2: keep the variable consistent
Signed-off-by: Kenneth Feng <kenneth.feng@xxxxxxx>
Acked-by: Lijo Lazar <lijo.lazar@xxxxxxx>
Thanks,
Lijo
---
.../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 33 +++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
index e2265f50bacc..5e9e507a710e 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c
@@ -2179,10 +2179,39 @@ static int smu_v13_0_0_set_power_profile_mode(struct smu_context *smu,
}
}
- /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */
- workload_type = smu_cmn_to_asic_specific_index(smu,
+ if (smu->power_profile_mode == PP_SMC_POWER_PROFILE_COMPUTE &&
+ (((smu->adev->pdev->device == 0x744C) && (smu->adev->pdev->revision == 0xC8)) ||
+ ((smu->adev->pdev->device == 0x744C) && (smu->adev->pdev->revision == 0xCC)))) {
+ ret = smu_cmn_update_table(smu,
+ SMU_TABLE_ACTIVITY_MONITOR_COEFF,
+ WORKLOAD_PPLIB_COMPUTE_BIT,
+ (void *)(&activity_monitor_external),
+ false);
+ if (ret) {
+ dev_err(smu->adev->dev, "[%s] Failed to get activity monitor!", __func__);
+ return ret;
+ }
+
+ ret = smu_cmn_update_table(smu,
+ SMU_TABLE_ACTIVITY_MONITOR_COEFF,
+ WORKLOAD_PPLIB_CUSTOM_BIT,
+ (void *)(&activity_monitor_external),
+ true);
+ if (ret) {
+ dev_err(smu->adev->dev, "[%s] Failed to set activity monitor!", __func__);
+ return ret;
+ }
+
+ workload_type = smu_cmn_to_asic_specific_index(smu,
+ CMN2ASIC_MAPPING_WORKLOAD,
+ PP_SMC_POWER_PROFILE_CUSTOM);
+ } else {
+ /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */
+ workload_type = smu_cmn_to_asic_specific_index(smu,
CMN2ASIC_MAPPING_WORKLOAD,
smu->power_profile_mode);
+ }
+
if (workload_type < 0)
return -EINVAL;
