On 04/29/ , Haohui Mai wrote: > Thanks for pointing it out. The v5 patch added the code back. > > ~Haohui But you didn't remove the following codes added in v4. if (adev->firmware.load_type == AMDGPU_FW_LOAD_DIRECT) { + sdma_v5_2_ctx_switch_disable_all(adev); + sdma_v5_2_halt(adev); + sdma_v5_2_halt() has been called in sdma_v5_2_load_microcode(). No need to call these two functions here. Regards, Lang > On Thu, Apr 28, 2022 at 10:05 PM Lang Yu <Lang.Yu@xxxxxxx> wrote: > > > > On 04/28/ , Haohui Mai wrote: > > > If I understand correctly, the original code will disable the HALT bit > > > of the register mmSDMA0_F32_CNTL twice on other code paths -- one in > > > the sdma_v5_2_ctx_switch_enable() and the other one in > > > sdma_v5_2_enable(). > > > > > > The change ensures that the bit is only disabled once. Just wondering, > > > which one is the expected behavior? > > > > > > ~Haohui > > > > The HALT bit of the register mmSDMA0_F32_CNTL is not set/reset in original sdma_v5_2_ctx_switch_enable() > > (https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.freedesktop.org%2Fagd5f%2Flinux%2F-%2Fblob%2Famd-staging-drm-next%2Fdrivers%2Fgpu%2Fdrm%2Famd%2Famdgpu%2Fsdma_v5_2.c%23L523&data=05%7C01%7CLang.Yu%40amd.com%7C2df035ef6ad5411215a208da299c0253%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637868047861293833%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2FLpd6TUyxSe96rEzbyvV0zXNPZ%2BIokiT8KtGAKea8Co%3D&reserved=0) > > > > Regards, > > Lang > > > > > On Thu, Apr 28, 2022 at 6:27 PM Lang Yu <Lang.Yu@xxxxxxx> wrote: > > > > > > > > On 04/28/ , ricetons@xxxxxxxxx wrote: > > > > > From: Haohui Mai <ricetons@xxxxxxxxx> > > > > > > > > > > The patch fully deactivates the DMA engine before setting up the ring > > > > > buffer to avoid potential data races and crashes. > > > > > > > > > > The v4 patch addresses the comments from Lang Yu <Lang.Yu@xxxxxxx>. > > > > > > > > > > Signed-off-by: Haohui Mai <ricetons@xxxxxxxxx> > > > > > --- > > > > > drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 113 ++++++++++++++----------- > > > > > 1 file changed, 62 insertions(+), 51 deletions(-) > > > > > > > > > > diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c > > > > > index 013d2dec81d0..b000117b77d0 100644 > > > > > --- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c > > > > > +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c > > > > > @@ -459,7 +459,6 @@ static void sdma_v5_2_ring_emit_fence(struct amdgpu_ring *ring, u64 addr, u64 se > > > > > } > > > > > } > > > > > > > > > > - > > > > > /** > > > > > * sdma_v5_2_gfx_stop - stop the gfx async dma engines > > > > > * > > > > > @@ -505,17 +504,21 @@ static void sdma_v5_2_rlc_stop(struct amdgpu_device *adev) > > > > > } > > > > > > > > > > /** > > > > > - * sdma_v5_2_ctx_switch_enable - stop the async dma engines context switch > > > > > + * sdma_v5_2_ctx_switch_enable_for_instance - start the async dma engines > > > > > + * context switch for an instance > > > > > * > > > > > * @adev: amdgpu_device pointer > > > > > - * @enable: enable/disable the DMA MEs context switch. > > > > > + * @instance_idx: the index of the SDMA instance > > > > > * > > > > > - * Halt or unhalt the async dma engines context switch. > > > > > + * Unhalt the async dma engines context switch. > > > > > */ > > > > > -static void sdma_v5_2_ctx_switch_enable(struct amdgpu_device *adev, bool enable) > > > > > +static void sdma_v5_2_ctx_switch_enable_for_instance(struct amdgpu_device *adev, int instance_idx) > > > > > { > > > > > u32 f32_cntl, phase_quantum = 0; > > > > > - int i; > > > > > + > > > > > + if (WARN_ON(instance_idx >= adev->sdma.num_instances)) { > > > > > + return; > > > > > + } > > > > > > > > > > if (amdgpu_sdma_phase_quantum) { > > > > > unsigned value = amdgpu_sdma_phase_quantum; > > > > > @@ -539,61 +542,71 @@ static void sdma_v5_2_ctx_switch_enable(struct amdgpu_device *adev, bool enable) > > > > > phase_quantum = > > > > > value << SDMA0_PHASE0_QUANTUM__VALUE__SHIFT | > > > > > unit << SDMA0_PHASE0_QUANTUM__UNIT__SHIFT; > > > > > - } > > > > > - > > > > > - for (i = 0; i < adev->sdma.num_instances; i++) { > > > > > - if (enable && amdgpu_sdma_phase_quantum) { > > > > > - WREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_PHASE0_QUANTUM), > > > > > - phase_quantum); > > > > > - WREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_PHASE1_QUANTUM), > > > > > - phase_quantum); > > > > > - WREG32_SOC15_IP(GC, sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_PHASE2_QUANTUM), > > > > > - phase_quantum); > > > > > - } > > > > > > > > > > - if (!amdgpu_sriov_vf(adev)) { > > > > > - f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL)); > > > > > - f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL, > > > > > - AUTO_CTXSW_ENABLE, enable ? 1 : 0); > > > > > - WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL), f32_cntl); > > > > > - } > > > > > + WREG32_SOC15_IP(GC, > > > > > + sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_PHASE0_QUANTUM), > > > > > + phase_quantum); > > > > > + WREG32_SOC15_IP(GC, > > > > > + sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_PHASE1_QUANTUM), > > > > > + phase_quantum); > > > > > + WREG32_SOC15_IP(GC, > > > > > + sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_PHASE2_QUANTUM), > > > > > + phase_quantum); > > > > > } > > > > > > > > > > + if (!amdgpu_sriov_vf(adev)) { > > > > > + f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_CNTL)); > > > > > + f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL, > > > > > + AUTO_CTXSW_ENABLE, 1); > > > > > + WREG32(sdma_v5_2_get_reg_offset(adev, instance_idx, mmSDMA0_CNTL), f32_cntl); > > > > > + } > > > > > } > > > > > > > > > > /** > > > > > - * sdma_v5_2_enable - stop the async dma engines > > > > > + * sdma_v5_2_ctx_switch_disable_all - stop the async dma engines context switch > > > > > * > > > > > * @adev: amdgpu_device pointer > > > > > - * @enable: enable/disable the DMA MEs. > > > > > * > > > > > - * Halt or unhalt the async dma engines. > > > > > + * Halt the async dma engines context switch. > > > > > */ > > > > > -static void sdma_v5_2_enable(struct amdgpu_device *adev, bool enable) > > > > > +static void sdma_v5_2_ctx_switch_disable_all(struct amdgpu_device *adev) > > > > > { > > > > > u32 f32_cntl; > > > > > int i; > > > > > > > > > > - if (!enable) { > > > > > - sdma_v5_2_gfx_stop(adev); > > > > > - sdma_v5_2_rlc_stop(adev); > > > > > - } > > > > > + if (amdgpu_sriov_vf(adev)) > > > > > + return; > > > > > > > > > > - if (!amdgpu_sriov_vf(adev)) { > > > > > - for (i = 0; i < adev->sdma.num_instances; i++) { > > > > > - f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL)); > > > > > - f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_F32_CNTL, HALT, enable ? 0 : 1); > > > > > - WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL), f32_cntl); > > > > > - } > > > > > + for (i = 0; i < adev->sdma.num_instances; i++) { > > > > > + f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL)); > > > > > + f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_CNTL, > > > > > + AUTO_CTXSW_ENABLE, 0); > > > > > + WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_CNTL), f32_cntl); > > > > > } > > > > > } > > > > > > > > > > +/** > > > > > + * sdma_v5_2_halt - stop the async dma engines > > > > > + * > > > > > + * @adev: amdgpu_device pointer > > > > > + * > > > > > + * Halt the async dma engines. > > > > > + */ > > > > > +static void sdma_v5_2_halt(struct amdgpu_device *adev) > > > > > +{ > > > > > + sdma_v5_2_gfx_stop(adev); > > > > > + sdma_v5_2_rlc_stop(adev); > > > > > +} > > > > > + > > > > > /** > > > > > * sdma_v5_2_gfx_resume - setup and start the async dma engines > > > > > * > > > > > * @adev: amdgpu_device pointer > > > > > * > > > > > * Set up the gfx DMA ring buffers and enable them. > > > > > + * It assumes that the dma engine is stopped for each instance. > > > > > + * The function enables the engine and preemptions sequentially for each instance. > > > > > + * > > > > > * Returns 0 for success, error for failure. > > > > > */ > > > > > static int sdma_v5_2_gfx_resume(struct amdgpu_device *adev) > > > > > @@ -737,10 +750,7 @@ static int sdma_v5_2_gfx_resume(struct amdgpu_device *adev) > > > > > > > > > > ring->sched.ready = true; > > > > > > > > > > - if (amdgpu_sriov_vf(adev)) { /* bare-metal sequence doesn't need below to lines */ > > > > > - sdma_v5_2_ctx_switch_enable(adev, true); > > > > > - sdma_v5_2_enable(adev, true); > > > > > - } > > > > > + sdma_v5_2_ctx_switch_enable_for_instance(adev, i); > > > > > > > > > > r = amdgpu_ring_test_ring(ring); > > > > > if (r) { > > > > > @@ -784,7 +794,7 @@ static int sdma_v5_2_load_microcode(struct amdgpu_device *adev) > > > > > int i, j; > > > > > > > > > > /* halt the MEs */ > > > > > - sdma_v5_2_enable(adev, false); > > > > > + sdma_v5_2_halt(adev); > > > > > > > > > > for (i = 0; i < adev->sdma.num_instances; i++) { > > > > > if (!adev->sdma.instance[i].fw) > > > > > @@ -856,8 +866,8 @@ static int sdma_v5_2_start(struct amdgpu_device *adev) > > > > > int r = 0; > > > > > > > > > > if (amdgpu_sriov_vf(adev)) { > > > > > - sdma_v5_2_ctx_switch_enable(adev, false); > > > > > - sdma_v5_2_enable(adev, false); > > > > > + sdma_v5_2_ctx_switch_disable_all(adev); > > > > > + sdma_v5_2_halt(adev); > > > > > > > > > > /* set RB registers */ > > > > > r = sdma_v5_2_gfx_resume(adev); > > > > > @@ -865,6 +875,9 @@ static int sdma_v5_2_start(struct amdgpu_device *adev) > > > > > } > > > > > > > > > > if (adev->firmware.load_type == AMDGPU_FW_LOAD_DIRECT) { > > > > > + sdma_v5_2_ctx_switch_disable_all(adev); > > > > > + sdma_v5_2_halt(adev); > > > > > > > > You don't need call these functions here. > > > > > > > > In original code, you can see sdma_v5_2_load_microcode() calls > > > > sdma_v5_2_enable(adev, false) to halt the engine before load ucode. > > > > > > > > What I mean is sdma_v5_2_halt(adev) should have no functional change with > > > > original sdma_v5_2_enable(adev, false), like this, > > > > > > > > static void sdma_v5_2_halt(struct amdgpu_device *adev) { > > > > u32 f32_cntl; > > > > int i; > > > > > > > > sdma_v5_2_gfx_stop(adev); > > > > sdma_v5_2_rlc_stop(adev); > > > > > > > > if (!amdgpu_sriov_vf(adev)) { > > > > for (i = 0; i < adev->sdma.num_instances; i++) { > > > > f32_cntl = RREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL)); > > > > f32_cntl = REG_SET_FIELD(f32_cntl, SDMA0_F32_CNTL, HALT, 1); > > > > WREG32(sdma_v5_2_get_reg_offset(adev, i, mmSDMA0_F32_CNTL), f32_cntl); > > > > } > > > > } > > > > } > > > > > > > > But you remove the codes to set the HLAT bit of register mmSDMA0_F32_CNTL. > > > > > > > > Regards, > > > > Lang > > > > > > > > > r = sdma_v5_2_load_microcode(adev); > > > > > if (r) > > > > > return r; > > > > > @@ -881,12 +894,10 @@ static int sdma_v5_2_start(struct amdgpu_device *adev) > > > > > amdgpu_gfx_off_ctrl(adev, false); > > > > > > > > > > sdma_v5_2_soft_reset(adev); > > > > > - /* unhalt the MEs */ > > > > > - sdma_v5_2_enable(adev, true); > > > > > - /* enable sdma ring preemption */ > > > > > - sdma_v5_2_ctx_switch_enable(adev, true); > > > > > > > > > > - /* start the gfx rings and rlc compute queues */ > > > > > + /* Soft reset supposes to disable the dma engine and preemption. > > > > > + * Now start the gfx rings and rlc compute queues. > > > > > + */ > > > > > r = sdma_v5_2_gfx_resume(adev); > > > > > if (adev->in_s0ix) > > > > > amdgpu_gfx_off_ctrl(adev, true); > > > > > @@ -1340,8 +1351,8 @@ static int sdma_v5_2_hw_fini(void *handle) > > > > > if (amdgpu_sriov_vf(adev)) > > > > > return 0; > > > > > > > > > > - sdma_v5_2_ctx_switch_enable(adev, false); > > > > > - sdma_v5_2_enable(adev, false); > > > > > + sdma_v5_2_ctx_switch_disable_all(adev); > > > > > + sdma_v5_2_halt(adev); > > > > > > > > > > return 0; > > > > > } > > > > > -- > > > > > 2.25.1 > > > > >