From: George Shen <George.Shen@xxxxxxx>
[Why]
DP spec specifies that DPRX shall use the read interval in the
TRAINING_AUX_RD_INTERVAL_PHY_REPEATER LTTPR DPCD register. This
register's bit definition is the same as the AUX read interval register
for DPRX.
[How}
Remove logic which forces AUX read interval to 100us for repeaters when
in LTTPR non-transparent mode.
Reviewed-by: Wesley Chalmers <wesley.chalmers@xxxxxxx>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
Signed-off-by: George Shen <George.Shen@xxxxxxx>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 04878817e622..9dc99929b0cd 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1544,9 +1544,6 @@ static enum link_training_result perform_clock_recovery_sequence(
/* 3. wait receiver to lock-on*/
wait_time_microsec = lt_settings->cr_pattern_time;
- if (link->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT)
- wait_time_microsec = TRAINING_AUX_RD_INTERVAL;
-
if (link->dc->debug.apply_vendor_specific_lttpr_wa &&
(link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN)) {
wait_time_microsec = 16000;
--
2.25.1
