Cc: Hanghong Ma <hanghong.ma@xxxxxxx>
Cc: Mark Broadworth <mark.broadworth@xxxxxxx>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@xxxxxxx>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 45 -------------------
drivers/gpu/drm/amd/display/dc/dc_link.h | 1 -
.../display/dc/dce110/dce110_hw_sequencer.c | 24 ++++++++--
.../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 41 +++++++++++++++--
.../drm/amd/display/dc/dcn30/dcn30_hwseq.c | 39 ++++++++++++++--
.../drm/amd/display/dc/dcn31/dcn31_hwseq.c | 40 +++++++++++++++--
6 files changed, 131 insertions(+), 59 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index c01309a1cbf2..e5d6cbd7ea78 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1988,51 +1988,6 @@ static enum dc_status enable_link_dp_mst(
return enable_link_dp(state, pipe_ctx);
}
-void blank_all_dp_displays(struct dc *dc, bool hw_init)
-{
- unsigned int i, j, fe;
- uint8_t dpcd_power_state = '\0';
- enum dc_status status = DC_ERROR_UNEXPECTED;
-
- for (i = 0; i < dc->link_count; i++) {
- enum signal_type signal = dc->links[i]->connector_signal;
-
- if ((signal == SIGNAL_TYPE_EDP) ||
- (signal == SIGNAL_TYPE_DISPLAY_PORT)) {
- if (hw_init && signal != SIGNAL_TYPE_EDP) {
- /* DP 2.0 spec requires that we read LTTPR caps first */
- dp_retrieve_lttpr_cap(dc->links[i]);
- /* if any of the displays are lit up turn them off */
- status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
- &dpcd_power_state, sizeof(dpcd_power_state));
- }
-
- if ((signal != SIGNAL_TYPE_EDP && status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) ||
- (!hw_init && dc->links[i]->link_enc &&
- dc->links[i]->link_enc->funcs->is_dig_enabled(dc->links[i]->link_enc))) {
- if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
- fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
- if (fe == ENGINE_ID_UNKNOWN)
- continue;
-
- for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
- if (fe == dc->res_pool->stream_enc[j]->id) {
- dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
- dc->res_pool->stream_enc[j]);
- break;
- }
- }
- }
-
- if (!dc->links[i]->wa_flags.dp_keep_receiver_powered ||
- (hw_init && signal != SIGNAL_TYPE_EDP))
- dp_receiver_power_ctrl(dc->links[i], false);
- }
- }
- }
-
-}
-
static bool get_ext_hdmi_settings(struct pipe_ctx *pipe_ctx,
enum engine_id eng_id,
struct ext_hdmi_settings *settings)
diff --git a/drivers/gpu/drm/amd/display/dc/dc_link.h b/drivers/gpu/drm/amd/display/dc/dc_link.h
index 69b008bafbbc..a73d64b1fd33 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_link.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_link.h
@@ -277,7 +277,6 @@ bool dc_link_setup_psr(struct dc_link *dc_link,
struct psr_context *psr_context);
void dc_link_get_psr_residency(const struct dc_link *link, uint32_t *residency);
-void blank_all_dp_displays(struct dc *dc, bool hw_init);
/* Request DC to detect if there is a Panel connected.
* boot - If this call is during initial boot.
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 8108f9ae2638..af3e68d3e747 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1649,13 +1649,31 @@ static enum dc_status apply_single_controller_ctx_to_hw(
static void power_down_encoders(struct dc *dc)
{
- int i;
-
- blank_all_dp_displays(dc, false);
+ int i, j;
for (i = 0; i < dc->link_count; i++) {
enum signal_type signal = dc->links[i]->connector_signal;
+ if ((signal == SIGNAL_TYPE_EDP) ||
+ (signal == SIGNAL_TYPE_DISPLAY_PORT)) {
+ if (dc->links[i]->link_enc->funcs->get_dig_frontend &&
+ dc->links[i]->link_enc->funcs->is_dig_enabled(dc->links[i]->link_enc)) {
+ unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
+ dc->links[i]->link_enc);
+
+ for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+ if (fe == dc->res_pool->stream_enc[j]->id) {
+ dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+ dc->res_pool->stream_enc[j]);
+ break;
+ }
+ }
+ }
+
+ if (!dc->links[i]->wa_flags.dp_keep_receiver_powered)
+ dp_receiver_power_ctrl(dc->links[i], false);
+ }
+
if (signal != SIGNAL_TYPE_EDP)
signal = SIGNAL_TYPE_NONE;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index aa2d430f2a1a..44d27579d898 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1366,7 +1366,7 @@ void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
void dcn10_init_hw(struct dc *dc)
{
- int i;
+ int i, j;
struct abm *abm = dc->res_pool->abm;
struct dmcu *dmcu = dc->res_pool->dmcu;
struct dce_hwseq *hws = dc->hwseq;
@@ -1462,8 +1462,43 @@ void dcn10_init_hw(struct dc *dc)
dmub_enable_outbox_notification(dc);
/* we want to turn off all dp displays before doing detection */
- if (dc->config.power_down_display_on_boot)
- blank_all_dp_displays(dc, true);
+ if (dc->config.power_down_display_on_boot) {
+ uint8_t dpcd_power_state = '\0';
+ enum dc_status status = DC_ERROR_UNEXPECTED;
+
+ for (i = 0; i < dc->link_count; i++) {
+ if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
+ continue;
+
+ /* DP 2.0 requires that LTTPR Caps be read first */
+ dp_retrieve_lttpr_cap(dc->links[i]);
+
+ /*
+ * If any of the displays are lit up turn them off.
+ * The reason is that some MST hubs cannot be turned off
+ * completely until we tell them to do so.
+ * If not turned off, then displays connected to MST hub
+ * won't light up.
+ */
+ status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+ &dpcd_power_state, sizeof(dpcd_power_state));
+ if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+ /* blank dp stream before power off receiver*/
+ if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
+ unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
+
+ for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+ if (fe == dc->res_pool->stream_enc[j]->id) {
+ dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+ dc->res_pool->stream_enc[j]);
+ break;
+ }
+ }
+ }
+ dp_receiver_power_ctrl(dc->links[i], false);
+ }
+ }
+ }
/* If taking control over from VBIOS, we may want to optimize our first
* mode set, so we need to skip powering down pipes until we know which
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index 2936a334cd64..df2717116604 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -437,7 +437,7 @@ void dcn30_init_hw(struct dc *dc)
struct dce_hwseq *hws = dc->hwseq;
struct dc_bios *dcb = dc->ctx->dc_bios;
struct resource_pool *res_pool = dc->res_pool;
- int i;
+ int i, j;
int edp_num;
uint32_t backlight = MAX_BACKLIGHT_LEVEL;
@@ -534,8 +534,41 @@ void dcn30_init_hw(struct dc *dc)
hws->funcs.dsc_pg_control(hws, res_pool->dscs[i]->inst, false);
/* we want to turn off all dp displays before doing detection */
- if (dc->config.power_down_display_on_boot)
- blank_all_dp_displays(dc, true);
+ if (dc->config.power_down_display_on_boot) {
+ uint8_t dpcd_power_state = '\0';
+ enum dc_status status = DC_ERROR_UNEXPECTED;
+
+ for (i = 0; i < dc->link_count; i++) {
+ if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
+ continue;
+ /* DP 2.0 states that LTTPR regs must be read first */
+ dp_retrieve_lttpr_cap(dc->links[i]);
+
+ /* if any of the displays are lit up turn them off */
+ status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+ &dpcd_power_state, sizeof(dpcd_power_state));
+ if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+ /* blank dp stream before power off receiver*/
+ if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
+ unsigned int fe;
+
+ fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
+ dc->links[i]->link_enc);
+ if (fe == ENGINE_ID_UNKNOWN)
+ continue;
+
+ for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+ if (fe == dc->res_pool->stream_enc[j]->id) {
+ dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+ dc->res_pool->stream_enc[j]);
+ break;
+ }
+ }
+ }
+ dp_receiver_power_ctrl(dc->links[i], false);
+ }
+ }
+ }
/* If taking control over from VBIOS, we may want to optimize our first
* mode set, so we need to skip powering down pipes until we know which
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
index 186d08aec812..7308c4c744ba 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
@@ -72,7 +72,8 @@ void dcn31_init_hw(struct dc *dc)
struct dc_bios *dcb = dc->ctx->dc_bios;
struct resource_pool *res_pool = dc->res_pool;
uint32_t backlight = MAX_BACKLIGHT_LEVEL;
- int i;
+ int i, j;
+ int edp_num;
if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks)
dc->clk_mgr->funcs->init_clocks(dc->clk_mgr);
@@ -190,9 +191,40 @@ void dcn31_init_hw(struct dc *dc)
dmub_enable_outbox_notification(dc);
/* we want to turn off all dp displays before doing detection */
- if (dc->config.power_down_display_on_boot)
- blank_all_dp_displays(dc, true);
-
+ if (dc->config.power_down_display_on_boot) {
+ uint8_t dpcd_power_state = '\0';
+ enum dc_status status = DC_ERROR_UNEXPECTED;
+
+ for (i = 0; i < dc->link_count; i++) {
+ if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
+ continue;
+
+ /* if any of the displays are lit up turn them off */
+ status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+ &dpcd_power_state, sizeof(dpcd_power_state));
+ if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+ /* blank dp stream before power off receiver*/
+ if (dc->links[i]->ep_type == DISPLAY_ENDPOINT_PHY &&
+ dc->links[i]->link_enc->funcs->get_dig_frontend) {
+ unsigned int fe;
+
+ fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
+ dc->links[i]->link_enc);
+ if (fe == ENGINE_ID_UNKNOWN)
+ continue;
+
+ for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+ if (fe == dc->res_pool->stream_enc[j]->id) {
+ dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+ dc->res_pool->stream_enc[j]);
+ break;
+ }
+ }
+ }
+ dp_receiver_power_ctrl(dc->links[i], false);
+ }
+ }
+ }
/* If taking control over from VBIOS, we may want to optimize our first
* mode set, so we need to skip powering down pipes until we know which
