[PATCH 27/27] Revert "drm/amd/display: Add helper for blanking all dp displays"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This reverts commit 50ac5b14c74c5706796cb6378f25a2121dba5b2d.

This patch introduced a couple of dmesg warnings, this is not a valid
approach anymore. For this reason, we are reverting this patch, and we
need to revert the workaround patch.

Cc: Hanghong Ma <hanghong.ma@xxxxxxx>
Cc: Mark Broadworth <mark.broadworth@xxxxxxx>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@xxxxxxx>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 45 -------------------
 drivers/gpu/drm/amd/display/dc/dc_link.h      |  1 -
 .../display/dc/dce110/dce110_hw_sequencer.c   | 24 ++++++++--
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 41 +++++++++++++++--
 .../drm/amd/display/dc/dcn30/dcn30_hwseq.c    | 39 ++++++++++++++--
 .../drm/amd/display/dc/dcn31/dcn31_hwseq.c    | 40 +++++++++++++++--
 6 files changed, 131 insertions(+), 59 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index c01309a1cbf2..e5d6cbd7ea78 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1988,51 +1988,6 @@ static enum dc_status enable_link_dp_mst(
 	return enable_link_dp(state, pipe_ctx);
 }
 
-void blank_all_dp_displays(struct dc *dc, bool hw_init)
-{
-	unsigned int i, j, fe;
-	uint8_t dpcd_power_state = '\0';
-	enum dc_status status = DC_ERROR_UNEXPECTED;
-
-	for (i = 0; i < dc->link_count; i++) {
-		enum signal_type signal = dc->links[i]->connector_signal;
-
-		if ((signal == SIGNAL_TYPE_EDP) ||
-			(signal == SIGNAL_TYPE_DISPLAY_PORT)) {
-			if (hw_init && signal != SIGNAL_TYPE_EDP) {
-				/* DP 2.0 spec requires that we read LTTPR caps first */
-				dp_retrieve_lttpr_cap(dc->links[i]);
-				/* if any of the displays are lit up turn them off */
-				status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
-							&dpcd_power_state, sizeof(dpcd_power_state));
-			}
-
-			if ((signal != SIGNAL_TYPE_EDP && status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) ||
-					(!hw_init && dc->links[i]->link_enc &&
-					dc->links[i]->link_enc->funcs->is_dig_enabled(dc->links[i]->link_enc))) {
-				if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
-					fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
-					if (fe == ENGINE_ID_UNKNOWN)
-						continue;
-
-					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
-						if (fe == dc->res_pool->stream_enc[j]->id) {
-							dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
-									dc->res_pool->stream_enc[j]);
-							break;
-						}
-					}
-				}
-
-				if (!dc->links[i]->wa_flags.dp_keep_receiver_powered ||
-					(hw_init && signal != SIGNAL_TYPE_EDP))
-					dp_receiver_power_ctrl(dc->links[i], false);
-			}
-		}
-	}
-
-}
-
 static bool get_ext_hdmi_settings(struct pipe_ctx *pipe_ctx,
 		enum engine_id eng_id,
 		struct ext_hdmi_settings *settings)
diff --git a/drivers/gpu/drm/amd/display/dc/dc_link.h b/drivers/gpu/drm/amd/display/dc/dc_link.h
index 69b008bafbbc..a73d64b1fd33 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_link.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_link.h
@@ -277,7 +277,6 @@ bool dc_link_setup_psr(struct dc_link *dc_link,
 		struct psr_context *psr_context);
 
 void dc_link_get_psr_residency(const struct dc_link *link, uint32_t *residency);
-void blank_all_dp_displays(struct dc *dc, bool hw_init);
 
 /* Request DC to detect if there is a Panel connected.
  * boot - If this call is during initial boot.
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 8108f9ae2638..af3e68d3e747 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1649,13 +1649,31 @@ static enum dc_status apply_single_controller_ctx_to_hw(
 
 static void power_down_encoders(struct dc *dc)
 {
-	int i;
-
-	blank_all_dp_displays(dc, false);
+	int i, j;
 
 	for (i = 0; i < dc->link_count; i++) {
 		enum signal_type signal = dc->links[i]->connector_signal;
 
+		if ((signal == SIGNAL_TYPE_EDP) ||
+			(signal == SIGNAL_TYPE_DISPLAY_PORT)) {
+			if (dc->links[i]->link_enc->funcs->get_dig_frontend &&
+				dc->links[i]->link_enc->funcs->is_dig_enabled(dc->links[i]->link_enc)) {
+				unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
+									dc->links[i]->link_enc);
+
+				for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+					if (fe == dc->res_pool->stream_enc[j]->id) {
+						dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+									dc->res_pool->stream_enc[j]);
+						break;
+					}
+				}
+			}
+
+			if (!dc->links[i]->wa_flags.dp_keep_receiver_powered)
+				dp_receiver_power_ctrl(dc->links[i], false);
+		}
+
 		if (signal != SIGNAL_TYPE_EDP)
 			signal = SIGNAL_TYPE_NONE;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index aa2d430f2a1a..44d27579d898 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1366,7 +1366,7 @@ void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
 
 void dcn10_init_hw(struct dc *dc)
 {
-	int i;
+	int i, j;
 	struct abm *abm = dc->res_pool->abm;
 	struct dmcu *dmcu = dc->res_pool->dmcu;
 	struct dce_hwseq *hws = dc->hwseq;
@@ -1462,8 +1462,43 @@ void dcn10_init_hw(struct dc *dc)
 		dmub_enable_outbox_notification(dc);
 
 	/* we want to turn off all dp displays before doing detection */
-	if (dc->config.power_down_display_on_boot)
-		blank_all_dp_displays(dc, true);
+	if (dc->config.power_down_display_on_boot) {
+		uint8_t dpcd_power_state = '\0';
+		enum dc_status status = DC_ERROR_UNEXPECTED;
+
+		for (i = 0; i < dc->link_count; i++) {
+			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
+				continue;
+
+			/* DP 2.0 requires that LTTPR Caps be read first */
+			dp_retrieve_lttpr_cap(dc->links[i]);
+
+			/*
+			 * If any of the displays are lit up turn them off.
+			 * The reason is that some MST hubs cannot be turned off
+			 * completely until we tell them to do so.
+			 * If not turned off, then displays connected to MST hub
+			 * won't light up.
+			 */
+			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+							&dpcd_power_state, sizeof(dpcd_power_state));
+			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+				/* blank dp stream before power off receiver*/
+				if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
+					unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
+
+					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+						if (fe == dc->res_pool->stream_enc[j]->id) {
+							dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+										dc->res_pool->stream_enc[j]);
+							break;
+						}
+					}
+				}
+				dp_receiver_power_ctrl(dc->links[i], false);
+			}
+		}
+	}
 
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
index 2936a334cd64..df2717116604 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c
@@ -437,7 +437,7 @@ void dcn30_init_hw(struct dc *dc)
 	struct dce_hwseq *hws = dc->hwseq;
 	struct dc_bios *dcb = dc->ctx->dc_bios;
 	struct resource_pool *res_pool = dc->res_pool;
-	int i;
+	int i, j;
 	int edp_num;
 	uint32_t backlight = MAX_BACKLIGHT_LEVEL;
 
@@ -534,8 +534,41 @@ void dcn30_init_hw(struct dc *dc)
 			hws->funcs.dsc_pg_control(hws, res_pool->dscs[i]->inst, false);
 
 	/* we want to turn off all dp displays before doing detection */
-	if (dc->config.power_down_display_on_boot)
-		blank_all_dp_displays(dc, true);
+	if (dc->config.power_down_display_on_boot) {
+		uint8_t dpcd_power_state = '\0';
+		enum dc_status status = DC_ERROR_UNEXPECTED;
+
+		for (i = 0; i < dc->link_count; i++) {
+			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
+				continue;
+			/* DP 2.0 states that LTTPR regs must be read first */
+			dp_retrieve_lttpr_cap(dc->links[i]);
+
+			/* if any of the displays are lit up turn them off */
+			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+						     &dpcd_power_state, sizeof(dpcd_power_state));
+			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+				/* blank dp stream before power off receiver*/
+				if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
+					unsigned int fe;
+
+					fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
+										dc->links[i]->link_enc);
+					if (fe == ENGINE_ID_UNKNOWN)
+						continue;
+
+					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+						if (fe == dc->res_pool->stream_enc[j]->id) {
+							dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+										dc->res_pool->stream_enc[j]);
+							break;
+						}
+					}
+				}
+				dp_receiver_power_ctrl(dc->links[i], false);
+			}
+		}
+	}
 
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
index 186d08aec812..7308c4c744ba 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
@@ -72,7 +72,8 @@ void dcn31_init_hw(struct dc *dc)
 	struct dc_bios *dcb = dc->ctx->dc_bios;
 	struct resource_pool *res_pool = dc->res_pool;
 	uint32_t backlight = MAX_BACKLIGHT_LEVEL;
-	int i;
+	int i, j;
+	int edp_num;
 
 	if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks)
 		dc->clk_mgr->funcs->init_clocks(dc->clk_mgr);
@@ -190,9 +191,40 @@ void dcn31_init_hw(struct dc *dc)
 		dmub_enable_outbox_notification(dc);
 
 	/* we want to turn off all dp displays before doing detection */
-	if (dc->config.power_down_display_on_boot)
-		blank_all_dp_displays(dc, true);
-
+	if (dc->config.power_down_display_on_boot) {
+		uint8_t dpcd_power_state = '\0';
+		enum dc_status status = DC_ERROR_UNEXPECTED;
+
+		for (i = 0; i < dc->link_count; i++) {
+			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
+				continue;
+
+			/* if any of the displays are lit up turn them off */
+			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+						     &dpcd_power_state, sizeof(dpcd_power_state));
+			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+				/* blank dp stream before power off receiver*/
+				if (dc->links[i]->ep_type == DISPLAY_ENDPOINT_PHY &&
+						dc->links[i]->link_enc->funcs->get_dig_frontend) {
+					unsigned int fe;
+
+					fe = dc->links[i]->link_enc->funcs->get_dig_frontend(
+										dc->links[i]->link_enc);
+					if (fe == ENGINE_ID_UNKNOWN)
+						continue;
+
+					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+						if (fe == dc->res_pool->stream_enc[j]->id) {
+							dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i],
+										dc->res_pool->stream_enc[j]);
+							break;
+						}
+					}
+				}
+				dp_receiver_power_ctrl(dc->links[i], false);
+			}
+		}
+	}
 
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
-- 
2.25.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux